HP BL2x220c - ProLiant - G5 Server A User Manual page 31

CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
IMPORTANT:
bracket with the alignment holes in the heatsink.
IMPORTANT:
server blade does not power up.
IMPORTANT:
system ROM before installing the processor.
NOTE: Do not discard the processor protective cover. Always install the processor protective
cover if the processor is removed from the socket.
To install the component:
Power down the server blade (on page 13).
1.
Remove the server blade (on page 14).
2.
Access the internal server components (on page 14).
3.
Remove the heatsink blank. Retain the heatsink blank for future use.
4.
When installing the heatsink, align the guide pins on the processor retention
Processor socket 1 must always be populated. If processor socket 1 is empty, the
If upgrading processor speed or adding additional processors, update the
Hardware options installation 31