Server blade signal
Server B NIC 2
(Embedded)
Server B mezzanine
For detailed port mapping information, see the HP BladeSystem enclosure installation poster or the
HP BladeSystem enclosure setup and installation guide on the HP website
(http://www.hp.com/go/bladesystem/documentation).
Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must be configured with network
interconnect devices to manage signals between the server blades and the external network.
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-thru modules
and switch modules. For more information about interconnect module options, see the HP website
(http://www.hp.com/go/bladesystem/interconnects).
Installing a server blade
CAUTION:
enclosure unless all bays are populated with either a component or a blank.
Remove the device bay blank.
1.
c7000 interconnect bay
4
7 and 8
To prevent improper cooling and thermal damage, do not operate the server blade
c3000 interconnect bay
2
3 and 4
Interconnect bay labels
Setup 19