Lenovo M55p - ThinkCentre - 8808 Hardware Maintenance Manual page 60

Diagnostic Error Code
000-250-XXX BIOS APM failure
000-270-XXX BIOS ACPI failure
001-000-XXX System Test Passed
001-00X-XXX System Error
001-01X-XXX System Error
001-024-XXX System Addressing test failure
001-025-XXX System Checksum Value error
001-026-XXX System FLASH data error
001-027-XXX System Configuration/Setup error
001-032-XXX System Device Controller failure
001-034-XXX System Device Buffer Allocation failure
001-035-XXX System Device Reset condition detected
001-036-XXX System Register error
001-038-XXX System Extension failure
001-039-XXX System DMI data structure error
001-040-XXX System IRQ failure
001-041-XXX System DMA failure
001-195-XXX System Test aborted by user
001-196-XXX System test halt, error threshold exceeded
54
Hardware Maintenance Manual
FRU/Action
1. Flash the system. See "Flash update procedures"
on page 375
2. System board
1. Flash the system. See "Flash update procedures"
on page 375
2. System board
No action
System board
System board
System board
1. Flash the system. See "Flash update procedures"
on page 375
2. System board
1. Flash the system. See "Flash update procedures"
on page 375
2. System board
1. Run Setup
2. Flash the system. See "Flash update procedures" on
page 375
3. System board
System board
1. Reboot the system
2. Flash the system. See "Flash update procedures" on
page 375
3. Run memory test
4. System board
System board
System board
1. Adapter card
2. System board
1. Flash the system. See "Flash update procedures"
on page 375
2. System board
1. Power-off/on system and re-test
2. System board
1. Power-off/on system and re-test
2. System board
Information only Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file