Table of Contents
Advertisement
Battery and Charger
WARNING:
Use only Sprint-approved or Kyocera-approved
batteries and chargers with your device. The
failure to use a Sprint-approved or Kyocera-
approved battery and charger may increase the
risk that your device will overheat, catch fire, or
explode, resulting in serious bodily injury, death,
or property damage.
Sprint-approved or Kyocera-approved batteries and
accessories can be found at Sprint Stores or through
Kyocera; or call 1-866-866-7509 to order. They are also
available at
www.sprint.com
Battery Capacity
Your device is equipped with two Lithium Ion (Li-Ion)
batteries. It allows you to recharge your battery before it
is fully drained.
When the battery level drops to 15%, a pop-up window
warns you that the battery is low. When the battery level
drops to 0%, the device shuts down.
.
Note:
Long backlight settings, searching for service, vibrate
mode, browser use, and other variables may reduce
the battery's talk and standby times.
Tip:
Watch your device's battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
See "Setting Up Your Device" on page 2.
Removing the Battery
1.
Make sure the device is off so that you do not lose
any stored numbers or messages.
2.
Firmly press your thumbs against the battery cover
and push upward to remove it.
3.
Grasp the white pull-tab extending from the battery
pack and pull the battery out of its compartment.
WARNING:
Do not handle a damaged or leaking Li-Ion
battery as you can be burned.
2A. Device Basics
13
Advertisement
Table of Contents
