Overview - Behringer POWERPLAY P16-M Manual

POWERPLAY 16
P16
P16-MB — Mounting Bracket for
P16-M
Mounting bracket for P16-M Digital
Personal Mixer
Attaches to standard mic, music or
drum stands
P16-D — 16-Channel Digital
ULTRANET Distributor
Distribution Hub for P16-I for
system expansion
1 ULTRANET input feeds 8 ULTRANET
outputs (RJ-45)
Provides bus-power and 16-channel
signal transmission for all 8 outputs
Up to six P16-D ULTRANET
Distributors can be combined for a
total of forty-eight P16-M Personal
Mixers
Status LED indicators for RJ-45 input
and 8 RJ-45 outputs
Internal autorange power supply for
maximum flexibility (100 - 240 V~),
noise-free audio, superior transient
response plus low power
consumption for energy saving
Common Features
Extremely rugged construction
ensures long life even under the
most demanding conditions
Conceived and designed by
BEHRINGER Germany
Front View Panel
SETUP configuration
buttons allow user 3-band EQUALIZER with
to define groups, sweepable MID FREQ
plus store and control provides tonal
recall last mix adjustment
MAIN button SOLO button allows
selects the MAIN user to listen to
stereo bus selected inputs
Rear View Panel
Power socket and
ON/OFF switch
ULTRANET IN/
THRU connectors
for daisy-chaining
additional devices
Adjustable OUTPUT
LIMITER control to
protect ears and
headphones
MUTE button PAN control VOLUME control
allows user to with meter sets adjusts level of
mute to selected selected input selected input,
input channel, placement within stereo pair, group
stereo linked pair stereo image or MAIN stereo bus
or pre-selected
group of channels
MIDI IN port provides
remote control of all
channels by external
device such as BEHRINGER
BCF2000, BCR2000, etc.
LINE OUT ¼" jacks can
be used to connect
to active monitors,
wireless in-ear monitor
transmitters, etc.
Page 3 of 5
OUTPUT LEVEL
controls volume
level present at
PHONES and LINE
OUT jacks
CHANNEL SELECT
buttons each with
two LEDs (signal
and clip) indicate
currently selected
single channel,
stereo pair or
pre-assigned groups
PHONES jack
accepts standard
headphones or wired
in-ear monitors