Connecting I/O Devices - ECS G31T-M Manual

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS2 Mouse
Use the upper PS/2 port to connect a PS/2 pointing device.
PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard.
Serial Port
Use the COM port to connect serial devices such as mice or
(COM1)
fax/modems. COM1 is identified by the system as COM1/3.
VGA Port Connect your monitor to the VGA port.
LAN Port
Connect an RJ-45 jack to the LAN port to connect your
computer to the Network.
USB Ports Use the USB ports to connect USB devices.
Use the three audio ports to connect audio devices. The
Audio Ports
first jack is for stereo line-in signal. The second jack is for
(optional)
stereo line-out signal. The third jack is for microphone.
This motherboard may adopt 8-channel audio ports that correspond
to the A,B, C, and E port respectively. In addition, all of the 3 ports,
B, C, and E provide users with both right & left channels individually.
Users please refer to the following note for specific port function
definition.
A: Center & Woofer
B: Back Surround
C: Side Surround
The above port definition can be changed to audio input or
audio output by changing the driver utility setting.
Installing the Motherboard
D: Line-in
E: Front Out
F: Mic_in Rear
21