Load Default Settings; Supervisor Password - ECS A790GXM-AD3 Manual

Voltage Function (Disabled)
Use this item to enable or disable the Voltage Function. If enable, users can increase
the hardware voltage through BIOS settings.
Warning: Please pay attention that doing overvoltage may result in damage
to hardware.
AMD Phenom (tm) II X3 720 Processor Speed (2800MHz)
This is display-only field and displays the information of the CPU installed in your
computer.
NB Clk (2000MHz)
This item shows the frequency of Northbridge clock.
Press <Esc> to return to the main menu setting page.

Load Default Settings

This option opens a dialog box to ask if you are sure to install optimized defaults
or not. You select [OK], and then press <Enter>, the Setup Utility loads all default
values; or select [Cancel], and then press <Enter>, the Setup Utility does not load
default values.

Supervisor Password

This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Change Supervisor Password
: Move
F1:General Help
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Supervisor Password
: Not Installed
Press Enter
Install or Change the
password.
Enter : Select +/-/: Value F10: Save
F9: Optimized Defaults
Using BIOS
Help Item
ESC: Exit
39