Table of Contents
Advertisement
14
Follow these instructions to install an add-on card:
1
Remove a blanking plate from the system case corresponding to the
slot you are going to use.
2
Install the edge connector of the add-on card into the expansion slot.
Ensure that the edge connector is correctly seated in the slot.
3
Secure the metal bracket of the card to the system case with a screw.
For some add-on cards, for example graphics adapters and network
adapters, you have to install drivers and software before you can
begin using the add-on card.
Installing the Motherboard
Hide quick links:
Advertisement
Table of Contents
