DriveRack
Navigation Modes
Once you have selected a program with a configuration that accommodates your application,
the DriveRack offers instant access to edit effect types within the configuration.
To instantly access an effect module, simply press the corresponding button in the button array
for the desired module.
Once you have reached the module that you wish to edit, use the PREV PG and NEXT
PG buttons to move through the pages within the module. The DATA wheel is used to edit
parameter values. The following illustration shows an example of the Compressor module in
edit mode:
Note: The cursor indicates the currently selected parameter for editing. To select parameters
to edit from the current page, press the DATA wheel until the cursor is next to the parameter
that you wish to edit.
6
N
D
A
4
S
D
B
2X6
P
P P
2
®
LR
5
COMP THR
3
Compressor
1
Over Easy
Configuration Functions
-0+
-50 -30 -12 -5 0
3.3 Editing Factory Programs
ON
OFF
DriveRack® User Manual
Section 3
NAME: ROCK V
<DATA> - SELECTS
<PREV/NEXTPG> - L
PRESS <STORE> TO
21