Navigating The Delay Section; Navigating The Utility/Meters Section - dbx DriveRack 260 User Manual

the pages of selected module.
DriveRack

Navigating the Delay Section

From program mode, press the Delay button. Pressing the Data Wheel will select the effect parameter to be edited.
Navigating the Delay Section
Successive Presses of the Delay button will move you through pre and post crossover delays.
From program mode, press the Delay button. Pressing the Data Wheel will select the effect parameter to be edited.
Successive Presses of the Delay button will move you through pre and post crossover delays.

Navigating the Utility/Meters Section

From program mode, press the UTILITY button. Pressing the Data Wheel will select the effect parameter to be edited.
Navigating the Utility/Meters Section
<PREV PG NEXT PG>
From program mode, press the UTILITY button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG NEXT PG>
Noise gate- Limiter
AGC-
Noise gate- Limiter
AGC-
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Navigating the WIZARD Section
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
®
DELAY
Delay - On/Off
Length - Delay Time - Course, Fine
Units - Seconds,Feet,Meters
DELAY
Delay - On/Off
Length - Delay Time - Course, Fine
Successive presses of the Data wheel will select
Units - Seconds,Feet,Meters
effect parameters within the currently selected page.
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Pressing and holding the Utility button will enter you into the meter mennu
UTILITY
LCD Contrast 1-16
AEQ Plot - RTA/GEQ
Pressing and holding the Utility button will enter you into the meter mennu
UTILITY
260 Device Level-
LCD Contrast 1-16
Low, Med, High
AEQ Plot - RTA/GEQ
Output Jumpers -
260 Device Level-
Setting - 14, 22, 30dB
Low, Med, High
1-3 Limiter 4-6 Zone Controller-
Output Jumpers -
1-3
Setting - 14, 22, 30dB
1-3
Limiter 4-6 Zone Controller-
1-3
Editing Functions
2.7 Navigating the Delay Section
2.8 Navigating the Utility/Meters Section
PUP Prog. - Current/Stored
PUP Mute - Current/Stored
Edit High Password
PUP Prog. - Current/Stored
Edit Medium Password
PUP Mute - Current/Stored
1-6
Edit High Password
Edit Medium Password
Zone Controller- Output Trims
1-6
4-6 1-3
Zone Controller-
Output Trims
4-6
1-3
Section 2
ZC Panel - 1-6 Security Level - Module Select
(Store) - Edit Panel Security Level- Low, Med, High
Program List Size- 1-10 Program Change mode
ZC Panel - 1-6 Security Level - Module Select
List Index - 1-10 Normal/Program
(Store) - Edit Panel Security Level- Low, Med, High
Program Number Lock 1-25
Program List Size- 1-10 Program Change mode
List Index - 1-10 Normal/Program
Program Number Lock 1-25
Output Trims
4-6
Output Trims
4-6
DriveRack® User Manual
DELAY
DELAY
UTILITY
UTILITY
METERS
METERS
17