Table of Contents
Advertisement
Direct Button Operation
You can change
the volurne
by pressing
VOL+/-
on
the TV or on the remote
control
unit.
To increase the volume, press VOL ÷
• To decrease the volume, pless VOL -
I0>
,
_2ol
Audio
status
You can turn on the TV or put it on standby
by
pressing
POWER
on the TV or on the remote
control
unit. (See page 11 .)
You can change
channels
by pressing
CH/X/V
or _9,
(DOT).
Examples:
To select a I or 2-digit cbannel number {e. g., Channel 5):
Press 5 _
ENT
To select a 3-digit cllannel number (e. g., Channel l 15):
Press 1 _
1 _
5_
ENT
To select a 4-digit cbannel number (e. g., Ollanne122.1}:
Press 2 _
2 _
• {DOT} _
1 _ENT
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds
• If you push "0" by itself, nothing will happen.
Complete the above steps within a few seconds,
• When you enter 0-9 and • (DO_, channel selection will be
made if there is no operation within a few seconds
You can select 4 preset favorite channels
in 4 different
categories.
Press A, B, C or D.
• While watching the TV, you can toggle the selected
channels by pressing A, B, C and D
• See page 24 for details of favorite channel settings.
• When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below
See page 24 for details on the Output Select function.
Mutes
the current
sound output.
Press MUTE.
• "r_"
will be displayed on the screen for 30 minutes, and
the sound is silenced
Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below
Mute will be canceled ifyou press VOL + / -
or MUTE.
Mute will be canceled after SOminutes have passed,
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
Allows you to set a time when the _V automatically
switches
to standby.
Press SLEEP.
• The remaining time displays when the sleep timer has been set
Each time you press SLEEP, the remaining time switches
as shown below.
Off _.30
=_ 60 == 90 =_ 120
When set, the time automatically starts courlting down
Ifyou want to ad ust the sleep timer, you can press SLEEP
twice then change the time setting
Five minutes before the tin-le expires, the remaining time
displays every minute
Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when 1he remaining time reacheszero
When the sleep timer is set, its indicator on the TV lights red
Press FLASHBACK
to switch to the previously
tuned
channel.
Press FLASHBACK again to switch back to the currently
tuned channel
= FLASHBACK will not work if no channel has been changed
after the %/is turned on
12
Hide quick links:
Advertisement
Table of Contents
