Setting Default Routes - Altigen AltiWare ACM 5.2 Administration Manual

Table of Contents

Advertisement

Chapter 14: Out Call Routing Configuration
To create a route
1. Click Add under the route definition list. The Add an entry dialog box appears:
2. Type in a name and index number, and click OK.
3. To add trunks to the route, select trunks from the Not Member list and use the
button to move selected trunks to the Member Trunks list.
4. Use the Up and Down buttons to change the position of a trunk in the Member
Trunks list. This is the order in which trunks are accessed.
5. Click Apply.
To delete a route
Select the route you want to delete, and click the Delete button.

Setting Default Routes

You can set default routes for four types of outgoing calls: local, long distance,
international, and emergency.
It is important that you set up default routes right after routes are
WARNING!
defined. Failing to do so will cause outbound dialing failure.
170
AltiWare ACM 5.2 Administration Manual

Advertisement

Table of Contents
loading

Table of Contents