Changing An Extension's Scope From Global To Local - Altigen AltiWare ACC 5.2 Administration Manual

Changing an Extension's Scope from Global to Local

If you want to change an extension's scope from Global to Local, you can highlight the
extension and click the Change All Global to Local button. This extension's scope in
other member systems will be impacted after Global is changed to Local. Using the
previous case as an example, you may encounter one of the following situations when
changing an extension's scope from Global to Local.
Situation 1: One Global and no conflict
Before you make the change, extension 100's scope is as follows:
Ext. System A
100 Global
After you change extension 100 to Local, the scope of 100 will be:
Ext. System A
100 Local
After you make the change, users in Systems B and C cannot dial and ring
Note:
extension 100. Only System A users can call local extension 100.
Situation 2: One or more Global with conflict
Before you make the change, the scope of extensions 403 and 404 is as follows:
Ext. System A
403 Global
404 Global
After you change the two extensions to Local, their scope will be:
Chapter 25: Enterprise VoIP Network Management
System B System C
Remote Remote
System B System C
Not Found Not Found
System B System C
Local Local
Global Local
AltiWare ACC 5.2 Administration Manual 325