Changing The Altienterprise Manager Password - Altigen AltiWare ACC 5.2 Administration Manual

Configuration Buttons
Servers button displays the VoIP domain name, servers in the system, and server
•
ID length. Lets you add/remove servers and change the VoIP domain master.
Displays the configuration and informational tabs listed in the next section.
Codec button lets you configure individual codec profiles—silence suppression,
•
codec, jitter buffer range, RTP packet length, DTMF delivery, and enable/disable SIP
early media.
User button displays information about extensions in the VoIP domain and lets you
•
change an extension to global or local and relocate an extension.
Global LCR button lets you add E.164 number patterns and specify source and
•
target sites.
Tabs Displayed with the Servers Button
Information tab displays information about the selected site.
•
IP Networks tab defines IP networks and the bandwidth information for an AltiWare
•
site. Bandwidth usage control for Internet and intranet can be set up here. If the
bandwidth usage exceeds the maximum setting, the call will not be established.
IP Dialing Table tab defines the IP dialing table for an AltiWare site. Specified
•
information here includes a codec profile and a protocol (SIP or H323) for the
communication from this site to the selected site.
IP Codec tab lets you specify an inter-gateway codec and define IP device ranges
•
to which you can assign a codec profile.
Number Plan tab displays the number plan information that is set up in AltiWare
•
Administrator, System Configuration window, Number Plan tab.

Changing the AltiEnterprise Manager Password

Only a person with DomainAdmin rights can change the AltiEnterprise Manager
password. To change the password, click the Password button at the top of the
AltiEnterprise Manager window. The following dialog box opens:
Enter the old password, and the new password. Confirm the password, and click OK.
Chapter 25: Enterprise VoIP Network Management
AltiWare ACC 5.2 Administration Manual 303