Setting Login Status For System Restart; Setting Workgroup Mail Management - Altigen AltiWare ACC 5.2 Administration Manual

Table of Contents

Advertisement

Chapter 22: Workgroup Configuration
To add extension(s) to a workgroup:
1. Select the workgroup in the Group List.
2. On the Group Member tab, click the extension number(s) in the Not Member list.
Use Shift+click and Ctrl+click to select several extensions.
3. Click the Add button between the columns to move them to the Member list.
If the workgroup pilot extension is configured to Ring All Available Members,
Note:
the maximum number of members is 20. See "Setting Call Handling Options"
on page 273 for details.
To remove extension(s) from a workgroup:
1. Click the extension number(s) in the Member list.
2. Click Remove to move them to the Not Member list.

Setting Login Status for System Restart

Whenever the system is restarted, the administrator can use the drop-down list at the
bottom of the Group Member tab to:
Keep Login Status—all group members retain their original login status for that
group prior to restart (default setting)
All Logout—all group members are logged out of the workgroup when the system
is restarted.

Setting Workgroup Mail Management

The Mail Management settings define how voice messages are handled for a workgroup,
including how messages are announced and processed, and how much capacity is
allotted to message storage.
To work with mail management settings, click the Mail Management tab, and select
the workgroup number you want to work with from the Group List.
268
AltiWare ACC 5.2 Administration Manual

Advertisement

Table of Contents
loading

Table of Contents