Chapter 12: Trunk Configuration
Incoming Call Routing
To set incoming call routing for a trunk, select the trunk on the General tab, then click
the In Call Routing tab in the Trunk Configuration window. The trunk location
appears in the title bar.
Figure 15. Trunk Configuration, In Call Routing tab
Regular Trunk Calls
For each trunk—or using Apply to to apply the settings to multiple trunks—you can set
routing for the three time periods defined in the System Configuration window,
Business Hours tab ("Setting Business Hours" on page 48):
During Business Hours
•
Outside Business Hours
•
Non Workdays
•
Within each of these three time slots, you have the following routing options for incoming
calls:
Route to an extension selected in the drop-down list
•
Route to an auto attendant number selected in the drop-down list
•
Route to a Line Park line selected in the drop-down list (see "Line Park Configuration"
•
on page 255 for more detail)
Route to the operator
•
Outgoing Call Blocking
To set outgoing call blocking for a trunk, select the trunk in the General tab, then click
the Out Call Blocking tab in the Trunk Configuration window.
160
AltiWare ACC 5.2 Administration Manual