Page 1 User Guide This is a 「User Guide」 installed on the TV. The contents of this guide are subject to change without prior notice for quality improvement.
Page 2 ❐ ❐ To❐view❐program❐information Displays information about the current program and/or current time, etc. 1 Move the pointer of the Magic remote control to the top of the TV screen. 2 Click the activated channel banner area. 3 The program details will be displayed at the bottom of the TV screen. ✎...
Page 3 To❐set❐favorite❐channels ❐ ❐ SMART❐ ❐➾ Settings❐➙ CHANNEL❐➙ Channel❐Edit 1 Move to the desired channel on Wheel(OK) button. Channel is selected. 2 Press Set as Favorite. 3 Select the desired favorite channel group. 4 Select Enter. Favorite is set. To❐use❐Favorite ❐ ❐ SMART❐ ❐➾❐Ch.❐List Channel list will appear. Select the desired preset favorite channel from Favorite List A to D.
Page 4 To❐set❐Auto❐Tuning ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐CHANNEL❐➙❐Auto❐Tuning Automatically tunes the channels. ✎ Channels are not registered properly unless the antenna/cable is connected correctly. ✎ Auto Tuning only sets channels that are currently broadcasting. ✎ If Lock System is turned on, a pop-up window will appear asking for password.
Page 5 To❐set❐channels❐manually ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐CHANNEL❐➙❐Manual❐Tuning Adjusts channels manually and saves the results. For digital broadcasting, signal strength, etc. can be checked.
Page 6 To❐edit❐channels ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐CHANNEL❐➙❐Channel❐Edit Edits the saved channels. Set as favorite, block/unblock and Add/Delete etc. the selected channel.
Page 7 SMART ➾ Settings ➙ PICTURE ➙ Aspect Ratio Selects the screen aspect ratio. 16:9 Resizes the image ratio to fit a 16:9 screen. Displays high-quality image without loss. Just Scan ✎ In DTV/HDMI/Component (over 720p) mode, Just Scan available. Set by Depending on the input signal, screen aspect ratio changes to 4:3 Program or 16:9.
Page 8 ✎ While viewing an external device, these cases may result in image burn: - a video with stationary caption (such as network name) - 4 : 3 aspect ratio mode for an extended period Take caution when using these functions. ✎...
Page 9 SMART ➾ Settings ➙ PICTURE ➙ Energy Saving Reduces power consumption by adjusting screen brightness. TV sensor detects the ambient lighting and automatically Auto adjusts the screen brightness. Turns off the Energy Saving mode. Minimum/ Medium/ Applies the pre-set Energy Saving mode. Maximum Screen is turned off and only sound is played.
Page 10 SMART ➾ Quick Menu ➙ AV Mode Views the TV with the best picture / audio optimized for different AV modes. Views with the value set at the picture / sound menu. Cinema Optimizes picture and audio settings for movies. Game Optimizes picture and audio settings for games.
Page 11 To❐adjust❐pictures❐with❐Picture❐Wizard ❐ ❐ SMART❐ ❐➾ Settings❐➙❐PICTURE❐➙❐Picture❐Wizard❐Ⅱ Use the remote control and follow the instructions of the Picture Wizard to calibrate and adjust for optimum picture quality without expensive pattern devices or help from a specialist. Follow the instructions to obtain the optimum picture quality.
Page 12 To❐select❐Picture❐Mode ❐ ❐ SMART❐ ❐➾ Settings❐➙❐PICTURE❐➙❐Picture❐Mode Selects the picture mode optimized for the viewing environment or the program. Heightens contrast, brightness and sharpness to Vivid display vivid images. Displays images in standard levels of contrast, Standard brightness and sharpness. Cinema / Game Displays the optimum picture for movie, game.
Page 13 Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu is ISF-certified and provided for picture tuning experts. ꕋ Expert (ISF logo can only be used on ISF-certified TV units.) ISFccc : Imaging Science Foundation Certified Calibration Control ✎...
Page 14 To❐fine-tune❐picture❐mode ❐ ❐ SMART❐ ❐➾ Settings❐➙❐PICTURE❐➙❐Picture❐Mode❐➙❐Backlight❐/❐ Contrast❐/❐Brightness❐/❐Sharpness❐/❐Color❐/❐Tint❐/❐Color❐Temp. First select a Picture Mode of your choice. Adjusts the display brightness by varying the brightness of Backlight the LCD panel. Adjusts the difference between bright and dark regions of the Contrast screen. Brightness Adjusts the overall screen brightness.
Page 15 Color Adjusts the colors on the screen darker or lighter. Tint Adjusts the red/green color balance. Color Temp. Adjusts the overall tone of colors to warm or cool. ✎ Depending on the input signal or other picture settings, the range of detailed items for adjustment may differ.
Page 16 To❐set❐advanced❐control ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐PICTURE❐➙❐Picture❐Mode❐➙❐Advanced❐ control/Expert❐Control❐ Calibrates the screen for each picture mode or adjusts picture settings for a special screen. First select a Picture Mode of your choice. Adjusts the contrast to the optimal level according to the Dynamic Contrast brightness of the image.
Page 17 Skin Color : Skin color spectrum can be separately set to implement the skin color as defined by the user. Preferred Color Grass Color : Natural color spectrum (meadows, hills, etc.) can be separately set. Sky Color : Sky color is set separately. Provides a crystal-clear picture by improving the details in Super Resolution areas where the picture is blurry or unclear.
Page 18 Filters a specific color spectrum in RGB colours to fine-tune Color Filter colour saturation and hue accurately. Expert Pattern Patterns used for expert adjustment. Adjusts the overall tone of the screen as desired. White Balance In Expert mode, detailed fine-tuning can be set via the Method / Pattern etc.
Page 19 To❐set❐additional❐picture❐options ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐PICTURE❐➙❐Picture❐Mode❐➙❐Picture❐Option Adjusts detailed setting for images. Noise Reduction Reduces screen noise in the video. MPEG Noise Reduces noise caused by compressing digital video. Reduction Adjusts the brightness or darkness of the screen to suit the Black Level black level of the picture input using the degree of darkness (black level) of the screen.
Page 20 [Depending on model] Eye Care Adjusts screen brightness to prevent eye glare. [Depending on model] Saves power consumption by adjusting the brightness corresponding to the movement of the image on the Motion Eye Care screen. ✎ It does not work while watching 3D images. ✎...
Page 21 To❐reset❐Picture❐Mode ❐ ❐ SMART❐ ❐➾ Settings❐➙❐PICTURE❐➙❐Picture❐Mode❐➙❐Picture❐Reset Resets values customized by the user. Each picture mode is reset. Select the picture mode you wish to reset.
Page 22 To❐use❐Sound❐Mode ❐ ❐ SMART❐ ❐➾ Settings❐➙❐SOUND❐➙❐Sound❐Mode Optimizes TV audio to the selected sound mode. Standard Suitable for all types of video Music/Cinema/ [Depending on model] Sport/Game Sets audio optimized for a specific genre. Adjusts the volume to the desired level using the User User Setting...
Page 23 To❐fine-tune❐the❐volume ❐ ❐ SMART❐ ❐➾ Settings❐➙❐SOUND❐➙❐Sound❐Mode❐➙❐User❐EQ❐ Sets Sound Mode User Setting first. 100 Hz / 300 Hz / 1 kHz/ Sets EQ by manually adjusting sound bands. 3 kHz / 10 kHz Reset Resets previously changed equalizer value.
Page 24 To❐use❐Smart❐Sound❐Mode❐ ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Smart❐Sound❐Mode Provides optimized sound adjusted for each content type. ✎ If the Smart Sound Mode function is enabled, Sound Mode, Virtual Surround Plus Clear Voice II are automatically adjusted.
Page 25 To❐use❐Virtual❐Surround❐sound ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Virtual❐Surround❐plus LG’s proprietary audio processing technology allows 5.1ch-like surround sound from two speakers. ✎ If Clear Voice ll is set to ON, Virtual Surround plus will not be chosen. To❐use❐Clear❐Voice❐ll❐function ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Clear❐Voice❐ll Boosts voice clarity.
Page 26 To❐set❐Volume❐Mode❐ ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Volume❐Mode Sets various modes for volume control. Sets Auto Volume When clicking through different Auto Volume programs, the volume is automatically adjusted to the same level. Using a single volume curve may result in an inaudible or Volume Control loud sound depending on the environment.
Page 27 To❐synchronize❐audio❐and❐video ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐AV❐Sync.❐Adjust Synchronizes video and audio directly when they do not match. If you set AV Sync. Adjust you can adjust the sound output (TV speakers or SPDIF) to match the video. Adjusts the synchronization of the sound from the TV's internal speakers.
Page 28 Moving the slider to the right will add a delay to the Speaker video output. ✎ LG audio device is supported only for models with the optical digital port. Outputs broadcasting signals or the audio of an external Bypass device without audio delay.
Page 29 To❐use❐Sound❐Option❐Setting ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SOUND❐❐➙❐Sound❐Option❐Setting ❐ ❌ Analogue❐Out [Depending on model] Allows the user to select the Headphone External Speaker (Audio Out) menu depending on the device connected. ❐ ❌ Balance Adjusts left/right audio balance.
Page 30 ❐ ❌ Sound❐Optimizer Allows optimized sound for custom TV installation. Normal General sound mode. Wall Mount Type Optimizes sound for a wall-mounted TV. Stand Type Optimizes sound for a stand-mounted TV.
Page 31 To❐use❐the❐TV’s❐speakers ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Sound❐Out❐➙❐TV❐Speaker Sound is output through the TV speaker. To❐use❐External❐Speakers ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Sound❐Out❐➙❐❐External❐Speaker❐ (Optical/HDMI❐ARC) [Only available for models with an optical or HDMI (ARC) port] Sound is output through the speaker connected to the optical port. ✎...
Page 32 ❐ ❌ To❐use❐ARC❐mode SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Sound❐Out❐➙❐❐External❐Speaker❐ (Optical/HDMI❐ARC)❐➙❐ARC❐Mode External audio devices can be connected via a High-Speed HDMIⓇ cable without an extra optical audio cable to output SPDIF. It interfaces with SimpLink. For an external device that supports ARC (Audio Return Channel), connect it to the HDMI(ARC) port.
Page 33 Even when the connected ARC-supported external audio device is turned on, audio output is not automatically processed through the external audio device's speakers. If an ARC-supported external audio device is turned on, audio output is automatically processed through the external audio device’s speakers. For SimpLink help, refer to 「User Guide →...
Page 34 To❐use❐Digital❐Sound❐Out ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Sound❐Out❐➙❐❐External❐ Speaker(Optical/HDMI❐ARC)❐➙❐Digital❐Sound❐Out Sets up Digital Sound Output. Item Sound Input Digital Sound output MPEG Dolby Digital Dolby Digital Auto Dolby Digital Plus Dolby Digital HE-AAC Dolby Digital...
Page 35 To❐connect❐and❐use❐an❐LG❐audio❐device ❐ ❐ LG audio device allows you to enjoy rich powerful sound. ❐ ❌ Wired❐Connection SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Sound❐Out❐➙❐LG❐Sound❐Sync❐ (Optical) Connect an LG audio device with the logo to the optical digital audio output port. ✎ Only available on models with an optical digital port.
Page 36 Magic Remote Control dongle. To purchase a Magic Remote Control dongle, please visit LGtvmall.com ✎ For a wireless connection, if the device fails to connect. Check the device power and make sure the LG Audio device is set up properly.
Page 37 ✎ If two or more devices are detected, the first detected device is connected first. To view more detected devices to connect, press the Show More button. ✎ When LG Sound Sync (Wireless) is active and you turn on the TV, it will search and try to connect the device which recently connected.
Page 38 To❐use❐❐Analog❐Out/Headphone ❐ ❐ [Depending on model] SMART❐ ❐➾❐Settings❐➙❐SOUND❐➙❐Sound❐Out❐➙❐❐Analog❐Out/❐ Headphone Select Headphone External Speaker (Audio Out) depending on the device connected to the analog out port. ✎ The available menu may vary depending on whether you select Headphone External Speaker (Audio Out) in the Sound Option Setting >...
Page 39 To❐select❐an❐external❐input ❐ ❐ SMART❐ ❐➾ Input❐List Selects external input. INPUT❐LIST Select❐an❐input❐device❐to❐view. Selects speaker. TV Speaker Selects input. Antenna HDMI1 HDMI2 DLNA Sets the Channel Mode. Change Device Name SimpLink Setting Set the Universal Control Channel Mode [Depending on country] Allows you to edit the Sets OSS.
Page 40 Using❐SimpLink ❐ ❐ SimpLink allows users to control and manage multiple multimedia devices using the TV remote control and SimpLink menu. 1 Connect the TV's HDMI IN terminal with the SimpLink device's HDMI output terminal using an HDMI cable. For home theater units with SimpLink support, connect the HDMI ports and then use an optical cable to connect the Optical Digital Audio Out from the TV to the Optical Digital Audio In of the SimpLink device.
Page 41 ✎ This function works only on devices with the SimpLink logo ( Make sure that the external device has a SimpLink logo. ✎ To use the SimpLink function, use a high-speed HDMIⓇ cable (with CEC, or Consumer Electronics Control feature added) and No. 13 pin connected for information exchange between devices.
Page 42 ❐ ❌ Explanation❐of❐SimpLink❐features❐❐ Play the multimedia device on the TV instantly without Direct Play extra steps. Select Select the desired device through the SimpLink menu and multimedia instantly control it from the TV screen. device. Disc playback Manage the multimedia device with the TV remote control. Turning the TV off with Auto Power function On in Power off all SimpLink setting will turn the power off on all SimpLink-...
Page 43 If the Auto Power function is set to On in the SimpLink Sync Power on settings, turning on a SimpLink device will turn the TV on. Speaker Selects speaker on the home theater unit or TV.
Page 44 To❐use❐Sleep❐Timer ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐TIME❐➙❐Sleep❐Timer Turns off the TV after a prescribed number of minutes. To cancel the Sleep Timer, select Off.
Page 45 To❐set❐current❐time ❐ ❐ SMART❐ ❐➾ Settings❐➙❐TIME❐➙❐Clock Checks or changes the time while watching TV. Synchronizes the TV clock to the digital time information sent by Auto the TV station. Sets the time and date manually if the auto setup does not Manual correspond to the current time.
Page 46 To❐set❐the❐TV❐to❐turn❐on❐and❐off❐automatically ❐ ❐ SMART❐ ❐➾ Settings❐➙❐TIME❐➙❐On❐Time/Off❐Time Sets On/Off time. Select Repeat to discontinue On Time/Off Time. ✎ To use On Time/Off Time, set the current time correctly. ✎ Even when the On Time function is on, the TV will turn off automatically in 120 minutes when no button is pressed within that time.
Page 47 To❐set❐password ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐LOCK❐➙❐Set❐Password Sets or changes TV password. ✎ The initial password is set as 「0000」.
Page 48 To❐lock❐system ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐LOCK❐➙❐Lock❐System Permits only specific programs by blocking channels or external input. Select the Lock System to On. Blocks the channels that contain inappropriate contents for children. The channels can be selected but the screen is blank Block Channel and the audio is muted.
Page 49 [Depending on model] Blocks the movies that are only broadcasted on the TV and contain inappropriate contents, based on the Motion Picture Association of America (MPAA) rating. • G : (General audiences) All ages admitted • PG : (Parental guidance suggested) Some material may not Movie Rating be suitable for children •...
Page 50 [Depending on model] Blocks the children’s TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature. TV Rating- • Age : TV-Y (All children, including children from ages 2-6), Children TV-Y7 (Directed to older children, suitable for children age 6 and above)
Page 51 Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip). ✎ The V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children. • Age : TV-G (General audience, suitable for all ages) TV-PG (Parental guidance suggested, containing material that TV Rating- are unsuitable for younger children)
Page 52 [In Digital mode Only] Downloadable This function operates only when TV has received Region5 Rating Rating data. The name of the rating option may differ. Input Block Block the input sources. Application Lock the Application. Lock...
Page 53 To❐set❐password ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐LOCK❐➙❐Set❐Password Sets or changes TV password. ✎ The initial password is set as 「0000」.
Page 54 To❐lock❐system ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐LOCK❐➙❐Lock❐System Permits only specific programs by blocking channels or external input. Select the Lock System to On. Blocks the channels that contain inappropriate contents for children. The channels can be selected but the screen is blank Block Channel and the audio is muted.
Page 55 [Depending on model] Selecting Canadian English rating system. • E : Exempt • C : Children TV Rating- • C8+ : Children eight years and older English • G : General programming, suitable for all audiences • PG : Parental Guidance •...
Page 56 [Depending on model] Selecting Canadian French rating system. • E : Exempt • G : General • 8ans+ : General-Not convenient for little children TV Rating- • 13ans+ : Not convenient for children of 13 years and French younger • 16ans+ : Not convenient for children of 16 years and younger •...
Page 57 [In Digital mode Only] Downloadable This function operates only when TV has received Region5 Rating Rating data. The name of the rating option may differ. Input Block Block the input sources. Application Lock the Application. Lock...
Page 58 SMART ➾ Settings ➙ OPTION ➙ Language Selects Menu Language and Audio Language displayed on the screen. Menu Selects a screen menu language. Language [In Digital Mode Only] Audio Selects the desired language when watching digital Language broadcasting containing several audio languages. Voice Select the language to make voice search.
Page 59 SMART ➾ Settings ➙ OPTION ➙ Caption View subtitles when the TV station provides subtitled programing. Program subtitles work only on digital/analog broadcasts or external input. Change Caption and select caption setting. CC 1-4 (Closed Captioning) / Text 1-4 Text 1-4 Displays the audio portion of a TV program as text on the TV screen.
Page 60 Set up the size and color of the subtitles on Digital Option. Please Digital select Set by Program or Custom. Option Select Custom to adjust minute options such as the subtitles’ size and color.
Page 61 To❐register❐the❐Magic❐Remote❐Control ❐ ❐ To use the Magic Remote Control, register it with your TV first. Register Magic Remote Control as follows: 1 Turn on the TV and wait for about 10 seconds and then press Wheel(OK) button while pointing the remote control at the TV. 2 The remote control is automatically registered and a registration completion message appears on the TV screen.
Page 62 To❐re-register❐the❐Magic❐Remote❐Control ❐ ❐ 1 Press the BACK buttons at the same time for about 5 SMART❐ seconds. 2 Press the Wheel (OK) button towards the TV to re-register the Magic Remote Control. ✎ Press the button and BACK button at the same time, for five SMART❐...
Page 63 To❐set❐the❐pointer❐of❐the❐Magic❐Remote❐Control ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Pointer Sets the speed and shape of the pointer that appears on the TV screen. Speed Sets the moving speed of the pointer. Shape Chooses from different shapes of the pointer. Size Chooses the size of the pointer. Set it to On.
Page 64 ✎ If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Remote Control to the right and left. Then, it appears again. ✎ If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control.
Page 65 ✎ Electronic devices nearby may cause communication interference. Devices such as microwave oven and wireless LAN use the same frequency range (2.4 GHz) as the Magic Remote Control, which may interfere with the remote control. ✎ The Magic Remote Control may be broken if dropped or damaged in any other way.
Page 66 To❐use❐the❐pattern❐gesture❐function❐ ❐ ❐ Press the Wheel(OK) button with the normal video screen on and draw a pattern toward the screen. Previous channel: Moves back to the previous channel. Recent list: Shows channels recently watched. Shows channel lists which be related to pattern. Choose the channel.
Page 67 To❐set❐Power❐Indicator ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Standby❐Light [Depending❐on❐model] Turns the standby light in the front panel of the TV on/off.
Page 68 To❐adjust❐the❐front❐LG❐Logo❐Light ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐LG❐Logo❐Light [Depending❐on❐model] You can adjust the LED brightness of the LG logo at the bottom of the TV. You can set the brightness of LG Logo Light to Off/Low/ Brightness Medium/High when the TV power is off.
Page 69 You can set the off time of LG Logo Light when the TV power is on. • Off right now : The light is turned off as the TV power is When TV is on • Off after 10 min : The light is turned off after 10 minutes when the TV power is on.
Page 70 To❐change❐TV❐mode ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Mode❐Setting Selects Home Use Store Demo. For use at home, select Home Use. Store Demo is a mode used for store display.
Page 71 To❐return❐to❐initial❐settings ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Initial❐Setting Deletes all optional settings and returns to initial default mode. Once initialization is complete, the TV will turn off and on by itself. ✎ If Lock System is activated, a pop-up password prompt will appear. ✎...
Page 72 To❐set❐ZIP❐Code ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐ZIP❐Code This function sets your area as the ZIP Code. ✎ You can check the information of area when network is connected.
Page 73 Select desired card. News Sports Viral Video -1 MBC HD July 4 8:30 pm Monster Ghost Abata Photo Game Thanks My Boy My Apps More Input List Settings Internet Search Photos Smart Sh... LG Smart... Game Wo... User Guide Ch.List...
Page 74 To❐use❐and❐edit❐MY❐CARD ❐ ❐ SMART❐ ❐➾❐MY❐CARD To enable you to easily check and access a wide variety of content and functions, the main functions are grouped into categories and displayed on cards. By selecting the card name, you can go to that category page. Select Edit at the top of the home screen to switch the position of the cards or...
Page 75 Select More to check apps pre-installed apps and apps you have downloaded. More Input List Settings Internet Search Photos Smart Sh... LG Smart... Game Wo... User Guide Ch.List Select the desired app to run.
Page 76 To❐edit❐items❐in❐My❐Apps ❐ ❐ SMART❐ ❐➾❐More❐➙My❐Apps❐➙❐Edit On the My Apps page, select Edit at the top of the screen to move or delete apps. Please note that system apps can be moved, but cannot be deleted. ✎ On models equipped with the Magic Remote Control, you can move apps or delete them by selecting and then dragging them.
Page 77 A wireless or wired network connection is necessary to use the Smart TV features. Once the network connection is established, Premium Content, LG Smart World, DLNA, and more are available. Network❐connection❐by❐one-click ❐ ❐ It’s easy to connect to a wired/wireless network.
Page 78 To❐connect❐network❐through❐Set❐Expert ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐NETWORK❐➙❐Network❐Connection Used in special circumstances such as in offices (For example, when a static IP is needed). 1 Select a network connection either through Wired or Wireless. 2 When connecting via Wi-Fi, use the one of the following network connection methods.
Page 79 Connects easily by pressing the button of a wireless WPS-PBC access point supporting PBC. Connects easily by typing in the PIN from the admin page WPS-PIN of the desired wireless AP.
Page 80 To❐use❐Wi-Fi❐direct❐function ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐NETWORK❐➙❐Wi-Fi❐direct Wi-Fi Direct is a function that allows your TV to connect with a Wi-Fi Direct device without going through a router or gateway. With SmartShare , you can watch the files stored on a device connected via Wi-Fi Direct.
Page 81 To❐use❐the❐Miracast™/Intel’s❐WiDi❐function ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐NETWORK❐➙❐Miracast™/Intel’s❐WiDi You can view the screen of a device with Miracast™ and Intel’s WiDi technologies on your TV. 1 Set Miracast™/Intel’s WiDi to On. (If you do plan on useing wither of these features, please change it to Off.) 2 Enable the Miracast™...
Page 82 Off, Wi-Fi Direct returns to the previous setting. ✎ You may not connect your TV to a non-LG Electronics device even when it is detected. ✎ It is recommended you to connect a device to a 5GHz router.
Page 83 OFF, disconnect and reconnect it, and then turn the power on to solve the problem. ✎ LG Electronics is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection. ✎ The network connection may not work properly because of network settings...
Page 84 ✎ DSL service must use a DSL modem; and cable service must use a cable modem. Since only a limited number of network connections may be available, TV network setting may not be used depending on the contract with Internet service provider. (If the contract does not allow more than one device per line, only the already-connected PC may be used.) ✎...
Page 85 ✎ The access point device must support wireless connections and wireless connection feature must be enabled on the device to have AP (access point) connection. Contact the service provider for availability of wireless connections on the access point. ✎ Check SSID and security settings of the AP. Refer to the appropriate documentation for SSID and security settings of the AP.
Page 86 What❐is❐Tag❐On? ❐ ❐ Tag On is a data transmission technology that can be used on smartphones with NFC (Near Field Communication). Simply by tapping your smartphone to a Tag On sticker, you can share content between your smartphone and TV. To connect your smartphone to the TV using Tag On, they must be connected on the same Wi-Fi network.
Page 87 ✎ Do not attach the sticker to a metal part of the TV. Otherwise, your smartphone cannot recognize the Tag On sticker. ✎ Do not crumple or fold the Tag On sticker. Otherwise, the Tag On is not recognized ✎ To purchase a Tag On sticker, please visit your local retailer. ✎...
Page 88 For more information on enabling NFC and setting the mode, refer to the owner's manual of your smartphone. 3 Tap your smartphone to a Tag On sticker. Make sure to follow the instructions on the smartphone screen and install the Tag On app and LG TV Remote app.
Page 89 4 Tap the smartphone to the Tag On sticker again. 5 Enter the pairing key displayed on the smart TV into the smartphone. When two or more TVs are detected, the pairing key is displayed only after the TV you want to connect to is selected in the device list. 6 When the connection is made properly, you can use Tag On.
Page 90 To❐use❐Tag❐On ❐ ❐ Follow the steps below to share content on your NFC-enabled smartphone. 1 Tap the NFC-enabled smartphone to a Tag On sticker. 2 The Tag On app starts running on the smartphone to connect to the smart - To use a Wi-Fi network, make sure that the smart TV is on the same network as your smartphone.
Page 91 ✎ If the Tag On app is not installed, the installation page appears automatically. ✎ For more information on how to share content between your smartphone and TV, refer to the Tag On app's help. Click to run the Tag On app on your smartphone and select the Settings menu to view the help.
Page 92 To❐connect❐a❐USB❐storage❐device ❐ ❐ Connect a USB storage device (external hard drive or USB memory) to the USB port of TV to enjoy multimedia files stored on the USB device. To remove a USB storage device, choose the Quick Menu ➙ USB Device disconnect the device.
Page 93 Caution❐when❐using❐USB❐storage❐device ❐ ❐ ✎ If a USB storage device has a built-in auto recognition program or uses its own driver, it may not work. ✎ Some USB storage devices may not work or work improperly. ✎ If you use a USB extension cable, the USB device may not be recognized or may not work properly.
Page 94 ✎ It is recommended to use USB Memory Sticks with 32 GB or less and USB hard drives with 2 TB or less. ✎ For USB hard drives with energy-saving features, turn off and turn on again if it does not work properly. For more information, refer to the user manual of USB HDD.
Page 95 To❐use❐SmartShare™ ❐ ❐ SMART❐ ❐➾❐SmartShare™ Provides photo/music/video files on the TV by connecting a USB device or home network (DLNA). SmartShare™ Recently Played Recent Displays photo/music/video Video Photo files from all of the devices Music connected to the TV. Recorded TV Newly Added Linked Device Shows how to connect PCs,...
Page 96 To❐control❐video❐playback ❐ ❐ Controls playback and sets options while viewing videos. Selects the desired point and plays Option Sets Options Play Controls...
Page 97 To❐control❐photo❐view ❐ ❐ Controls playback and sets options while viewing pictures in full screen. Option Displays photos as a Sets options. slideshow. Plays background music. Sets the filter. [Depending on model] Rotates or enlarges the picture.
Page 98 To❐control❐music❐playback ❐ ❐ Controls playback and sets options while playing music. Selects the desired point and plays Sets options Listen to music with the screen Plays Sets the repeat/random turned off. function.
Page 99 ✎ You can control playback using the ꕚ , ꕖ and ꕙ keys on a standard remote control. ✎ When using a USB device, time information will be not shown on screen.
Page 100 To❐set❐SmartShare™❐related❐functions ❐ ❐ SMART❐ ❐➾❐SmartShare™❐➙❐Settings Changes settings related to SmartShare™ content play. ❐ ❌ Advanced❐Setting Changes the name that appears when searching for the TV My TV Name from other devices. Network Status Checks the network connection. Allows use of wireless connection functions such as Wi-Fi Wi-Fi direct direct and WiDi.
Page 101 Registers or releases DivX. Checks DivX Registration Code for playing DivX-protected videos. Register at http://vod.divx.com. Uses Registration Code to rent or purchase movies at www. divx.com/vod. DivX(R) VOD ✎ When using the DivX Registration Code of another device, the rented/purchased DivX file cannot be played. Use only the DivX Registration Code granted to this device.
Page 102 ❐ ❌ Delete❐History To delete contents history, press Delete History button below. Use the contents at Contents Type Linked device menu.
Page 103 SmartShare™❐supporting❐file ❐ ❐ Maximum data transfer rate : 20 Mbps (Mega bit per second) External supported subtitle formats : *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) Internal supported subtitle formats : XSUB (Supports internal subtitles generated from DivX6)
Page 104 ❐ ❌ Video❐Supported❐Codec Maximum: 1920 x 1080 @30p Extension Codec Video VC-1 Advanced Profile, VC-1 Simple and Main Profile .asf .wmv Audio WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Video Motion Jpeg, MPEG-4 Part 2 .divx .avi MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Audio...
Page 105 Extension Codec Video H.264/AVC, MPEG-4 Part 2 .3gp .3g2 Audio AAC, AMR-NB, AMR-WB Video H.264/AVC .mkv Audio HE-AAC, Dolby Digital Video H.264/AVC, MPEG-2, VC-1 .trp MPEG-1 Layer I, II, MPEG-1 Layer III (MP3) Audio .mts Dolby Digital, Dolby Digital Plus, AAC .m2ts Video MPEG-1, MPEG-2...
Page 106 ❐ ❌ Available❐music❐file File type Item Info Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz Support MPEG1, MPEG2, Layer2, Layer3...
Page 107 ❐ ❌ Available❐photo❐file File type Item Profile Minimum: 64 x 64 Maximum: JPEG (jpeg, jpg, jpe) Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H)
Page 108 Caution❐for❐playing❐video ❐ ❐ ✎ Some subtitles created by users may not work properly. ✎ The video and subtitle files should be placed in the same folder. In this case, you must assign the same names for the video and subtitle files for proper display.
Page 109 ✎ Video files created by some encoders may not be played back. ✎ Video files in formats other than the ones specified here may not be played back. ✎ Playback of video files stored on a USB device that does not support High Speed, may not work properly.
Page 110 TV and the smartphone should be on the same network. 1 Enable Wi-Fi on the smartphone. 2 Install/run a DLNA app to share content on the smartphone (It’s called SmartShare on LG phones). 3 Run “Share my mobile phone Content”. 4 Select the kind of Content (video/music/photo) to play.
Page 111 To❐connect❐a❐DLNA❐DMR❐(Digital❐Media❐Renderer)❐ ❐ ❐ With the Windows 7 or Windows 8 PC operating system or DLNA-certified device (e.g. mobile phone), music/videos/photos may be played on the TV without installing a separate program. 1 Configure the TV and PC on the same network. Configure the Windows 7 or Windows 8 PC on the network.
Page 112 To❐connect❐a❐DLNA❐DMP❐(Digital❐Media❐Player) ❐ ❐ With a PC having SmartShare PC Software, music/video/photo files may be played on the TV via home networking. 1 Configure the TV and the PC on the same network. The TV and each device should be connected through a single access point to enable DLNA service. 2 Install the SmartShare PC Software from the web site onto a PC.
Page 113 ❐ ❌ If❐a❐DLNA❐malfunction❐occurs ✎ If a DLNA feature does not work properly, check network settings. ✎ A 5-GHz access point is needed to view 1080p videos via DLNA. A 2.4-GHz access point may cause frequent buffering or other problems. ✎ DLNA may not work properly on a wireless network. It is recommended to use a wired connection.
Page 114 ✎ The DLNA feature cannot be used with some access points that do not support multicasting. For more information, refer to access point manual or consult with the manufacturer. ✎ Supported file types may differ depending on the DLNA server environment, even for the file types supported by TV.
Page 115 To❐use❐Premium ❐ ❐ SMART❐ ❐➾❐Premium This service gives you easy access to a wide variety of content, such as video, news and UCC (User Created Content), at any time, as long as you are connected to a network. For Premium content, specialized country-specific services are offered that take into account regional content, in addition to globally provided content.
Page 116 LG Electronics’ proprietary billing system or that of each content provider. Before using the LG billing system, you will need to sign up for membership and register payment information on TV or the website (www.lgappstv.com) . You can sign up for membership on the login screen on your TV or our website.
Page 117 1 Click Sign In button in upper right corner of Home screen to sign in. 2 Move to the desired Premium service. (For some premium services, separate sign-in is required after signing up for the premium service.) 3 After checking the content’s pricing and service information, click the Purchase button.
Page 118 To❐reset❐Premium ❐ ❐ SMART❐ ❐➾❐Premium❐➙❐Option❐➙❐Initialization❐of❐Premium Premium list, Premium information, country setting, and user sign-in information will be reset. When an error occurs during Premium update, reset will fix the problem.
Page 119 Refer to the web site of each content provider for questions, troubleshooting, or latest information about Content. LG Electronics does not take any legal responsibility for content services and related information including discontinuation of service by the service provider.
Page 120 To❐use❐LG❐Smart❐World ❐ ❐ ❐➾❐LG❐Smart❐World SMART❐ LG Smart World is a TV application service available through Smart TV Service. You can download and enjoy many different apps (for fee or free) including education, entertainment, life and news. Sign in. When you sign in, ID is displayed.
Page 121 To❐sign❐up❐with❐LG❐Smart❐World ❐ ❐ ❐➾❐Sign❐In SMART❐ Sign up is required to download and run apps. 1 Select Sign Up and agree to Legal Notice. 2 Enter ID and password. 3 In Confirm Password box, enter password again. 4 Select to complete sign-up process.
Page 122 1 Click the Sign In button at the top of the home screen to log in. 2 Select the LG Smart World card. 3 Select an app you want from the list. 4 Check the details of the app, then select the Install button.
Page 123 ✎ You can purchase apps from PC or TV but you must use the TV to install and run them. ✎ If you have insufficient storage space on the TV, you can download apps to a USB storage device connected to the TV’s USB Apps port. Apps stored on a USB device are available to run/delete/move via the My Apps screen.
Page 124 To❐manage❐my❐information ❐ ❐ ❐➾❐LG❐Smart❐World SMART❐ 1 Sign in. 2 Select the currently signed-in ID at the top of the screen. 3 Select Page. 4 Manages by examining Member Information, My Purchased Apps List and TV Installed Apps List.
Page 125 Shows basic information about the ID currently signed My Information in. To change your member information, please visit www.lgappstv.com on your PC. Payment Inquiry Views Payment History with the ID you have signed in. Vews My Purchased Apps List with the ID you have Purchased Apps signed in.
Page 126 ➾ Search You can search apps and contents using the Search function of the LG Smart TV. When you enter keywords using the input device, such as the remote control, you can find apps from LG Smart World and some contents of the Premium service.
Page 127 To❐use❐the❐voice❐recognition❐function ❐ ❐ ❐ ❌ Using❐this❐function❐through❐search Go to SMART ➾ Search. Select the voice recognition icon ( ) on the left of the text field. 2 Speak slowly and clearly after the voice recognition window appears. After the voice recognition is completed, the Similar List window pops up. If the pop-up window does not have the results you want, press Retry to try again. Select the most similar result, then it will be displayed in the text field. Press the Search button to get the result you want.
Page 128 ❐ ❌ Using❐this❐function❐in❐the❐Internet❐(Web❐browser) Go to SMART ➾ Internet. Move the Magic Remote Control pointer in the text field on a website to open the virtual keyboard. 2 Select the voice recognition icon ( ) on the left of the text field on the virtual keyboard. 3 Speak slowly and clearly after the voice recognition window appears. 4 After the voice recognition is completed, the Similar List window pops up. If the pop-up window does not have the results you want, press Retry to try again. Select the most similar result, then it will be displayed on the text field. Press the Search button on the website to get the result you want.
Page 129 ❐ ❌ Using❐this❐function❐in❐the❐Social❐Center Go to SMART ➾ Social Center. 2 Log in with your LG Smart TV (www.lgappstv.com) ID. 3 Select the social network site you want and log in with your site ID. 4 Select the voice recognition icon ( ) on the left of the text field. 5 Speak slowly and clearly after the voice recognition window appears. 6 If your voice is recognized, press the Share button on the right to input the text in the social network service. If it is not recognized, try again or you can edit the recognized text by opening the virtual keyboard with the Magic Remote Control pointer. ✎ While the recognized result is in the text field, if you retry the voice recognition function, the previous result will be replaced with the new one.
Page 130 ✎ You can use Voice Search when you press the Voice recognition( ) on the Magic remote control even if QWERTY keyboard is shown on your screen. ✎ Check the network connection before using the voice recognition function. ✎ When speaking, hold the remote within 10cm of your mouth. ✎ The voice recognition may fail if you speak too fast or too slowly. ✎ The recognition rate may vary depending on the user's characteristics (voice, pronunciation, intonation, and speed) and the environment (noise and TV volume). ✎ To change the voice recognition language, go to SMART ➾ Settings ➙ OPTION ➙ Language ➙ Voice Recognition Language. ✎ You can turn the avatar On/Off in SMART ➾ Settings ➙ OPTION ➙ See Avatar. [This function may not be available on some models.] Powered by...
Page 131 What❐is❐Voice❐Mate? ❐ ❐ Voice Mate allows you to search desirable programs and content with your voice and adjust the TV. 1 Press the Voice recognition ( ) button on the Magic Remote Control. 2 When the Voice Display bar ( ) is activated on the left of the screen, say what you want to watch.
Page 132 How❐to❐Use❐Voice❐Mate? ❐ ❐ ✎ To use all the functions and services of Voice Mate, you need to set Smart Wizard and Time. Set up the network, region, auto tuning, and universal remote control through the Smart Wizard. ✎ In order to use Voice Mate, you must set up the network, time, region, and tuning.
Page 133 ✎ It is recommended you to point the universal remote control towards the set- top box when you use Voice Mate with it. ✎ When speaking a command, hold the remote within 10cm of your face. ✎ The voice search may fail when you speak too fast or too slow. ✎...
Page 134 What❐are❐other❐functions❐of❐Voice❐Mate? ❐ ❐ You can access various TV features using Voice Mate. You can tune TV channels and search channel Channel information. Example: “What time is American Idol on?” You can recommend and search TV programs and Recommendation content files. and Search Example: “Look up American Idol”...
Page 135 What❐is❐On❐Now? ❐ ❐ [This function may not be applied some countries.] On Now allows you to select and watch recommended programs currently available on your TV. The Favorite function allows you to select and watch recommended content related to the program you are watching.
Page 136 To❐use❐On❐Now ❐ ❐ ❐ ❌ To❐see❐in❐Half❐View SMART❐ ❐➾❐On❐Now Refreshes all list items and moves to the beginning of the screen Moves to Full View. simultaneously. On Now by Popularity All Genre Refresh More Now On TV TV show VOD Movie VOD For you Favorite...
Page 137 ❐ ❌ To❐see❐in❐Full❐View SMART❐ ❐➾❐MY❐CARD❐➙❐On❐Now On Now Sign in Now On TV Find Live TV TV show VOD Movie VOD For you Favorite by CH No. All Genre Sets the options. Refresh Half View Setting Refreshes all the list items and Move to Half View.
Page 138 ✎ For TV channels, you need to complete Auto Tuning to use this service properly. ✎ If you move to a different region, you need to set the region to your current location in order to use this service. ✎ The digital EPG (Electronic Program Guide) information which the TV receives may be different from the programs on the On Now TV list which uses an external EPG (Electronic Program Guide).
Page 139 ✎ The channel names of analog cable broadcasting on the On Now TV list are provided from an external EPG (Electronic Program Guide), so each name refers a cable broadcasting service provider but may not match. ✎ The program thumbnail image on the On Now TV list is the representative image of the program, and it may be different from the image of the actual TV program schedule.
Page 140 ✎ Press the button in the first pop-up while watching a program to use Live Plus. ✎ Live Plus is available only with the LG remote control. ✎ Information only some some programs and broadcasting companies provide this service.
Page 141 SMART ➾ Internet (Web browser) You can type in a URL manually or visit a Web site from the Favorites list. Type in Web addresses here. Add the current page to favorites. Open a new tab.
Page 142 ✎ The Internet (Web browser) supports up to Flash 11 but does not support platform-dependent technology like ActiveX. ✎ The Internet (Web browser) only works with pre-installed plug-ins. ✎ The Internet (Web browser) only replays the following media file formats: JPEG / PNG / GIF ✎...
Page 143 SMART ➾ Social Center LG Smart TV provides the Social Center app that allows you to communicate via social network services (SNS) such as Facebook and Twitter while watching TV. Using Social Center, you can communicate with friends while watching TV and view comments and pictures posted by your social networking friends at a glance.
Page 144 1 You can sign in with your LG TV account. If you are not a member yet, please sign up first. 2 Select a tab from Facebook, Twitter, Activity or Talk. Some functions are connected with other SNS, so you may need the SNS account to sign into the service.
Page 145 You can communicate via SNS such as Facebook Twitter Twitter while watching TV. With your Facebook account, you can easily see LG Smart TV’s great content recommended by other users. Click a Activity recommended program/show to move to the corresponding 3D World, K-pop, or LG app.
Page 146 ✎ You can use an Android smartphone as a keyboard when using SNS. Download the LG TV Remote app from the Google Play App Store. ✎ Social Center functions are subject to change due to software updates.
Page 147 2 Prepare the Smart TV camera for use. If your Smart TV is not equipped with a camera, install an LG video call camera (sold separately). (For more information, please refer to the installation manual or owner's manual of the camera.)
Page 148 To❐create❐a❐Skype❐account ❐ ❐ To make a video call using Skype, you need a Skype account. 1 Go to SMART ➾ Premium ➙ Skype and select Create account at the bottom. 2 Read the terms and conditions and select Agree. 3 Enter your Full name, Skype...
Page 149: Control Buttons
To❐use❐Skype ❐ ❐ When you sign in to Skype, you can use the call service of Skype. Information of the signed in account Broman Bill KRW 9.542.78 Call/Settings tab Contacts Call phones History My information Settings Skype screen Option Control buttons Add Contact Zoom Conference call...
Page 150 ❐ ❌ Call/Settings❐tab When you select a Skype contact, you can make (Video Call) or (Voice Call). Contacts You can add or delete a new contact. ✎ If there are more than 500 contacts, the list's performance and stability may be affected. You can make a call by pressing dial numbers.
Page 151 Once you have signed in, you can set status, Change picture, profile, or View account. My Information ✎ The maximum number of photos that can be saved using snapshot is limited. Once you have signed in, you can set Notification settings, Call forwarding,...
Page 152 To❐make❐a❐voice❐call ❐ ❐ ❐ ❌ To❐make❐a❐video❐call In Contacts, select a contact you want to call and select (Video Call). ❐ ❌ To❐make❐a❐voice❐call In Contacts, select a contact you want to call and select (Voice Call). ✎ You can perform call-related functions such as adding a contact during a call.
Page 153 To❐answer❐a❐call ❐ ❐ When a call is received while watching TV, a message appears at the bottom right of the screen. You can answer a video call/voice call Decline...
Page 154 ✎ You cannot use input devices such as keyboard while using Skype. ✎ Video calls cannot be made to a Mac with Skype 2.8 or earlier. ✎ Available content is subject to change by the content provider. For more information on the content service, please visit the website of your content provider.
Page 155 Sign up is required to use LG Smart World. Free apps are available immediately after signing up, but you need to register your payment method in order to use paid apps. You can sign up and register payment methods on the TV or on our website (www.lgappstv.com).
Page 156 • If you sign up on your TV, no additional sign-up on the LG I already signed up on website (www.lgappstv.com) is required. TV. Do I need to sign...
Page 157 Problem Solution • It is possible to register and use more than one ID on one Can each family member • To check the ID registered with TV from use a different ID with a SMART ➾ Sign in ➙ List.
Page 158 • To check purchased apps from the TV, sign in and open I purchased an app from the Purchased Apps menu. the LG TV Apps Web site. Select the ID at the top of Home and check the app in How can I use it on TV? My Page ➙...
Page 159 • Please check if the TV model supports LG Smart World. Can I use apps from LG • The apps provided from LG Smart TV's LG Smart World can Smart TV's LG Smart only be used on an LG Smart TV.
Page 160 Problem Solution How can I check the ID • Select the ID at the top of Home and check the currently currently signed in on the signed-in ID in My Page ➙ Information. I installed an app on the • Select SMART ➾...
Page 161 I forgot my password on • If you provide other information than the ID and password the TV. What should I do? when signing up on your TV or the LG website (www. lgappstv.com), you can recover your password on the website.
Page 162 Problem Solution • To purchase paid apps, you should have a credit card registered on the LG Smart World website (www.lgappstv. com) or have an account credit. If you do not want your Do I have to enter credit card details to be saved, you may add a credit to payment information to your account before buying an app.
Page 163 Problem Solution • To purchase paid apps, you need to have a credit card registered with the website (www.lgappstv.com). I signed up on my TV, but Also, you can have place a credit on your account ahead of I cannot purchase paid time.
Page 164 • If you are already a member, you can still use your existing ID or change it to an email address. • The LG account allows you to sign into all of the LG Smart services with a single ID and password.
Page 165 SMART❐ ❐➾❐Settings❐➙❐OPTION❐➙❐Service❐Country❐Setting You can change the country setting of your Smart TV. The Premium service and LG Smart World that are available for the country you selected will be provided. Auto Setting A service country is automatically set for your Smart TV.
Page 166 To❐use❐Screen❐Remote ❐ ❐ Press❐the❐ ❐button❐on❐the❐Magic❐Remote❐Control. Use the Magic Remote Control to select buttons on the Screen Remote displayed on the screen.
Page 167 ❐ ❌ To❐use❐Screen❐Remote ✎ The type of buttons on the Screen Remote varies depending on the region or the type of connected device. ✎ Image shown may differ from your TV. Change Device tab Exits the Screen Remote Moves the position of the Screen Remote to left or right TV operation buttons ✎...
Page 168 To❐control❐a❐device❐connected❐to❐the❐TV❐using❐the❐Screen❐ ❐ ❐ Remote You can control a device connected via SimpLink or MHL using the Screen Remote. 1 Check if the device is connected to the TV. 2 After pressing the button on the Magic Remote Control, select the device you want to control in the Change Device tab.
Page 169 To❐use❐the❐Universal❐Control❐function ❐ ❐ [For Magic Remote Control only] [This function may not be applied some countries.] With the Magic Remote Control, you can control a set-top box, Blue-ray player, home theater system, etc. 1 Connect the device you wish to control to the TV. 2 After pressing the button on the Magic Remote Control, select the icon of a device you want in the Change Device tab.
Page 170 ❐ ❌ To❐change❐or❐clear❐the❐Universal❐Control❐settings 1 After pressing the button on the Magic Remote Control, select the (TV/input selection) button. 2 Select Change Settings Cancel Settings at the bottom of the device to be changed. ✎ When Change Setting, check if the power of the device to be changed is turned on.
Page 171 ✎ You can set one device per type. ✎ With the Screen Remote, you can only control the devices of a brand or manufacturer that you can select in the setup screen. ✎ If you connect to a network before setting the universal remote control, update for the latest manufacturer list is available.
Page 172 What❐is❐Motion❐Recognition? ❐ ❐ You can control the TV simply by gesturing for the camera. You can use the Motion Recognition function to turn the TV off, change the channel, or control the volume. HDMI1 Component Move Selection...
Page 173 1 Prepare the Smart TV camera for use. If your Smart TV is not equipped with a camera, install an LG video call camera (sold separately). (For more information, please refer to the installation manual or owner's manual of the camera.)
Page 174 5 Move your hand left, right, up or down to select a function. Close and open your fist to start the function. 6 If you lower your hand out of the range of motion recognition, the controller disappears from the screen. ✎...
Page 175 ✎ Motion Recognition may not work properly if: • The room is either too bright or too dark. (Optimal ambient brightness: 50 lux - 600 lux) • There is a bright light behind you. • You are wearing a hat. •...
Page 176 ✎ A gesture may not be recognized in the following cases. • If Motion Recognition is set to SMART ➾ Settings ➙ OPTION, : Set it to On. • If any other menu than the motion recognition controller is displayed on the TV screen, : Make it disappear.
Page 177 ✎ If more than one hand is detected by the camera, it works with the first detected hand only. To use another hand to operate the controller, lower your hand down to clear the controller from the screen and then raise your hand up again.
Page 178 You can download the LG TV Remote app from Google Play Store or Apple App Store and control a TV that is on the same network ads your smartphone. • Now you can enjoy your favourite TV shows on your smartphone. (Some models only) •...
Page 179 • You can capture the screen you are watching and share it through social network services such as Twitter and Facebook. ✎ The supported functions may vary depending on the TV or the version of the LG TV Remote app.
Page 180 To❐use❐a❐USB❐wired/wireless❐mouse ❐ ❐ Connect your mouse to a USB port on the TV. Use the mouse to move the pointer on the TV screen and select the menu you want. Mouse Magic Remote Control Left Button OK Button on Magic Remote Control Wheel Button Wheel Button on Magic Remote Control ✎...
Page 181 ✎ It is recommended to use a product which has been tested for compatibility with LG TVs. LOGITECH K200, LOGITECH K400, MICROSOFT Comfort Curve 2000, MICROSOFT MS800, and LG Electronics ST-800 ✎ You can change the input language by pressing the language switch key (or the right Alt key) on your keyboard.
Page 182 Connect your gamepad to the USB port on the TV if the game requires a gamepad. ✎ It is recommended to use an authorized gamepad which is tested for compatibility with LG TVs. Logitech F310, Logitech F510, Logitech F710, Logitech Rumblepad 2, and Microsoft Xbox 360 Controller (wired)
Page 183 SMART ➾ Settings ➙ SUPPORT ➙ Software Update Uses Software Update to check and obtain the latest version. It is also possible to check manually for available updates. Set it to On. Software Update If an update is available, a prompt will appear to perform the update.
Page 184 ✎ When the update starts, the update progress window appears for a short time and disappears. ✎ The latest version can be obtained via digital broadcast signals or internet connections. ✎ Changing the channel while downloading the software via digital broadcast signal interrupts the download process.
Page 185 If the following symptoms occur, please recheck the system. It may not be a failure. General ❐ ❐ Problem Solution Cannot view certain • Adjust the location or orientation of the antenna. channels. • Save the desired channels on Auto Tuning Channel Edit.
Page 186 Pictures ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SUPPORT❐➙❐Picture❐Test Check if the image signal output is normal by beginning with Picture Test. If there is no problem with the test image, check external device connections or broadcast signals. Problem Solution Images from previous • Try adjusting the antenna to the direction of the TV channel or other channels station or refer to the manual for proper way to connect linger or the screen shows...
Page 187 Problem Solution • Such a problem may happen when there is strong Vibrating horizontal/vertical electronic interference. Turn off other electronic devices lines and fishnet patterns such as mobile phones, power tools and other small appear momentarily. electrical appliances. • It may happen when the signals are weak or the The screen display freezes reception unstable.
Page 188 Problem Solution • Check the HDMIⓇ cable specifications. Use only HDMIⓇ cable. Other cables may cause images to fade in and Image is not on or not clear out or not be displayed properly. when connected to HDMI. • Verify that all cable connections are securely connected.
Page 189 Sound ❐ ❐ SMART❐ ❐➾❐Settings❐➙❐SUPPORT❐➙❐Sound❐Test Try Sound Test first to verify that sound signal output is normal. When the test sound is normal, check external device connections or broadcast signals. Problem Solution Screen display is on but no • Check other TV channels. sound.
Page 190 Problem Solution • If it happens on a certain TV channel, it may be caused TV sound is not in sync with by problems with an individual station’s broadcast the lips or the sound breaks signal. Check with the TV station or local cable up occasionally.
Page 191 Problem Solution On certain channels, sound • On Language, set Language ➙ Audio Language as the does not come out or only desired language. Even if the language on Multi Audio the background music plays. is changed, once the power is turned off or the channel (If it is a program created for is changed, the default settings will be reset.
Page 192 PC❐connection❐problem ❐ ❐ Problem Solution • Verify that the computer and the TV are securely connected. • Turn the TV off and back on using the remote control. The screen display is not • Restart the PC with the TV on. on after connecting to •...
Page 193 Problem Solution When connected to the computer, the display is • Set up the resolution supporting PC input. (If it does not partially cut off or shifts work, please reboot the computer.) to one side.
Page 194 Trouble❐with❐replaying❐movies❐in❐My❐Media. ❐ ❐ Problem Solution • Check if the file on the USB storage device can be read Files on the Movie List are on a computer. not displayed. • Check that the file extension is supported. "This file is invalid." The •...
Page 195 Problem Solution • Verify that the file replays normally on the video player in "Unsupported Audio." the computer. (Check for damaged files.) The above error message • Check that the audio codec is supported by the appears or the sound is not computer.
Page 196 Problem Solution • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the video file shares the same name with the subtitle file. Subtitle is not displayed. • Verify that the video and subtitle files are placed in the same folder.
Page 197 ❐ ❐ Federal❐Communications❐Commission❐(FCC)❐Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Page 198 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
Page 199 ❐ ❐ Indoor❐use❐only FCC Caution: for indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product. Specially, within the 5.15-5.25 GHz band, U-NII device is restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operations.
Page 200 ❐ ❐ Industry❐Canada❐Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1 this device may not cause interference and 2 this device must accept any interference, including interference that may cause undesired operation of the device ❐...
Page 201 ❐ ❐ IC❐Radiation❐Exposure❐Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Page 202 ❐ ❐ Avis❐d’Industrie❐Canada❐sur❐l’exposition❐aux❐rayonnements Cet appareil est conforme aux limites d’exposition aux rayonnements d’Industrie Canada pour un environnement non contrôlé. REMARQUE : LE FABRICANT N’EST PAS RESPONSABLE DES INTERFÉRENCES RADIOÉLECTRIQUES CAUSÉES PAR DES MODIFICATIONS NON AUTORISÉES APPORTÉES À CET APPAREIL. DE TELLES MODIFICATIONS POURRAIENT ANNULER L’AUTORISATION ACCORDÉE À...
Page 203 Through these activities, LG seeks to contribute to conserving natural resources and protecting the environment. For more information about the LG Recycling Policy, please visit our global site at http://www.lg.com/global/sustainability/environment/take-back-recycling...

LG 47LN5750 User Manual

Quick Links

Related Manuals for LG 47LN5750

Summary of Contents for LG 47LN5750

Page 149: Control Buttons

Table of Contents