Customizing The Illumination Color; About Mixtrax; Mixtrax Menu - Pioneer DEH-X7500HD Owner's Manual

Owner's manual
Hide thumbs Also See for DEH-X7500HD:
Table of Contents

Advertisement

Available languages

Available languages

Section
Using this unit
02
3
Turn M.C. to select the illumination func-
tion.
Once selected, the following illumination func-
tions can be adjusted.
! Phone is not available for DEH-X7500HD and
DEH-X7500S.
Key Side (key section color setting)
You can select desired colors for the illuminated
sections on the left side on the front of this unit.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
! Preset colors (ranging from White to
Rose)
! Scan (cycle through all colors)
! Sets of colors (Warm, Ambient, Calm)
! Custom (customized illumination color)
Display Side (display section color setting)
You can select desired colors for the illuminated
sections on the right side on the front of this unit.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
! Preset colors (ranging from White to
Rose)
! Scan (cycle through all colors)
! Sets of colors (Warm, Ambient, Calm)
! Custom (customized illumination color)
Key & Display (key and display color setting)
18
En
You can select the desired colors for the keys and
display of this unit.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
! Preset colors (ranging from White to
Rose)
! Scan (cycle through all colors)
! Sets of colors (Warm, Ambient, Calm)
Phone (phone color setting)
You can select the desired key colors to display
when an incoming call is received.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
! Flashing The color selected from Key
Side flashes.
! Flash FX 1 to Flash FX 6 The system auto-
matically cycles through all available key
colors for this unit. Select the desired
mode.
! OFF No change in key color made when
incoming calls are received.
Notes
! The MIX/DISP OFF color cannot be changed.
! When Scan is selected, the system automati-
cally cycles through the preset colors.
! When Warm is selected, the system auto-
matically cycles through the warm colors.
! When Ambient is selected, the system auto-
matically cycles through the ambient colors.
! When Calm is selected, the system automati-
cally cycles through the calm colors.
! When Custom is selected, the customized
color saved is selected.
Using this unit
Customizing the
illumination color
You can create custom illumination colors for
both Key Side and Display Side.
1
Press M.C. to display the main menu.
2
Turn M.C. to display ILLUMINATION and
press to select.
3
Turn M.C. to display Key Side or
Display Side. Press to select.
4
Press M.C. and hold until the customizing
illumination color setting appears in the dis-
play.
5
Press M.C. to select the primary color.
R (red) G (green) B (blue)
6
Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot select a level below 20 for all three of
R (red), G (green), and B (blue) at the same time.
# You can also perform the same operation on
other colors.
Note
You cannot create a custom illumination color
while Scan, Warm, Ambient or Calm is se-
lected.

About MIXTRAX

MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing you
to experience your music as a nonstop mix com-
plete with visual and lighting effects.
Notes
! Depending on the file/song, sound effects
may not be available.
! MIXTRAX includes a MIXTRAX flashing color
mode that when switched on turns the flash-
ing colors on and off in time with the audio
track. If you find the feature distracting while
driving, please turn MIXTRAX off. Refer to Op-
erations using the MIXTRAX button on page 9.

MIXTRAX menu

1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select MIXTRAX.
3
Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabled when
MIXTRAX is on.
SHORT PLAYBACK (short playback mode)
You can select the length of the playback time.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
1.0 MIN (1.0 minute) 1.5 MIN (1.5 minutes)
2.0 MIN (2.0 minutes) 2.5 MIN (2.5 minutes)
3.0 MIN (3.0 minutes) Random (random)
OFF (off)
! Turn this option OFF if you want to play a selec-
tion all the way through from start to finish.
FLASH AREA (flash area)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Deh-x7500sDeh-x8500bsDeh-x8500bh

Table of Contents