Hdd Lock Password - Konica Minolta bizhub PRESS 1250/1250P User Manual

Security
Table of Contents

Advertisement

2.5
Administrator Security Functions
2.5.2

HDD Lock Password

With the Enhanced Security mode activated, you can specify a lock password (8 to 32 alphanumeric charac-
ters and/or symbols, case-sensitive) to the HDD. Setting up a lock password will prevent the leakage of doc-
ument data by taking out an illicitly-switched HDD. If the HDD itself is externally accessed, the data readout
will not be available until the correct lock password is entered.
NOTICE
Do not use your name, birthday, employee number, etc. for a password that others can easily figure out.
Be careful not to inform anybody else of the password, or not to let it known to others.
1
Press Utility/Counter on the control panel to display the Utility Menu Screen.
2
Press [04 Administrator Setting].
% The HDD lock password only functions when the Enhanced Security mode is activated. With the
Enhanced Security mode turned off, the message [Please set enhanced security mode] is displayed.
% Please be sure to set up an HDD lock password when using the Enhanced Security mode.
A password entry screen will be displayed.
3
Enter the administrator password.
% Use the touch panel keypad to enter the administrator password consisting of 8 alphanumeric char-
acters and symbols, then press [OK].
% The alphabetic characters are case-sensitive.
% If a wrong password or fewer than 8 alphanumeric characters/symbols are entered and [OK] is
pressed, the warning message [Password is incorrect / Please wait for a while] will appear, and no
key will work for five seconds. Enter the correct password after five seconds.
% The information on failed authentication will be saved in the audit log.
The Administrator Setting Menu Screen will be displayed.
bizhub PRESS 1250P
2
2-35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub press 1250p

Table of Contents