Belkin F5D8631-4 User Manual page 69

Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface
Changing System Settings
The "System Settings" page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on
and off the NAT function of the Modem Router.
Setting or Changing the Administrator Password
The Modem Router ships with NO password entered. If you wish to add a
password for greater security, you can set a password here. Write down
your password and keep it in a safe place, as you will need it if you need
to log into the Modem Router in the future. It is also recommended that
you set a password if you plan to use the remote management feature of
your Modem Router.
Changing the Login Time-Out Setting
The login time-out option allows you to set the period of time that you
can be logged into the Modem Router's advanced setup interface. The
timer starts when there has been no activity. For example, imagine you
have made some changes in the advanced setup interface, then left
your computer alone without clicking "Logout". Assuming the time-out
is set to 10 minutes, 10 minutes after you leave, the login session will
expire. You will have to log into the Modem Router again to make any
more changes. The login time-out option is for security purposes and the
default is set to 10 minutes.
Note: Only one computer can be logged into the Modem Router's
advanced setup interface at one time.
EN-67 EN-67