For The Installer; Installation And Connection Instructions; Warnings - AEG LAVAMAT 48580 User Information

B - FOR THE INSTALLER

Installation and connection instructions

Warnings

• This washing machine is heavy. Take care when moving it.
• You must remove the packing on the washing machine before
use. Failure to remove all transport protection devices can cause
damage to the washing machine or nearby furniture. The washing
machine must be unplugged while packing is being removed.
• Do not allow any one other than a qualified plumber to make the
hydraulic connections necessary to install your washing machine.
• The washing machine must be plugged in to a power outlet with
a conform earth.
• Call a qualified electrician if the electrical installation in your
residence is such that you have to modify it before you can con-
nect your washing machine.
• Please read the instructions in the «Electrical connection» chapter
carefully before connecting your washing machine.
• After installing your washing machine, make sure that it is not
standing on its electrical power supply cable.
• When your machine is installed on a carpeted floor, make sure
that the carpet does not close off the ventilation openings near
the bottom of the machine.
• The power supply cable may be only replaced by the After Sales
Service.
• Your manufacturer cannot be held responsible for any damage
resulting from a nonconform installation.
User information
37