ACR Electronics NAUTICAST inland AIS Installation Manual page 50

Service Menu Example:
N48^12' E 16^26' |1>0.00|2>0.00| * 2S
-----| |
View | +- 2. User Password Settings
-----| +- 4. Change DAC / ENI
Msg. | +- 6. Restore Factory Settings
-----|
Displ|
----------------------------------------
NUM|Select->|
Service Password Menu Example:
N 1
******* Change Service Password ********
Enter new password :
Repeat new password:
----------------------------------------
Enter the new Password: Then push Enter (M5).
Repeat the new Password: Then Push Enter (M5).
A minimum of 6, a maximum of 8 characters are allowed. Should the new password include
numbers, use the shift key to generate them.
Press Save to store the change.
Changing the User Password
Select Submenu 2 "User Password Settings" with cursor button [Up] & [Down] by pressing
number 2 on the keyboard.
46
|----------------------------------
| 6. Service Configuration
| +- 1. Change Service Password
| +- 3. Change MMSI / IMO
| +- 5. Change AIS Mode
|
|
| |<-Back
o o
25' E 0 18' |1>0.10|2>1.30|3>1.80nm
{Length: 4..8 characters}
| Save | | | Back
Y1-03-0212H