Entering Ship Settings - ACR Electronics NAUTICAST inland AIS Installation Manual

4.3 Entering Ship Settings

Select from the Main Menu "4. Ship Settings" This option requires the USER password. The
default password from the factory is mentioned on your AIS display at the protection foil.
Please see the appendix in your User Manual for additional password information. Enter
Password and use the up and down arrows to edit Ship Settings then press Enter or the
numeric reference on the keypad to select and edit.
Save after editing.
Main Menu Example:
N 1
-----| |
View | +- 2. AIS Status
-----| +- 4. Ship Settings
Msg. | +- 6. Service Configuration
-----| +- 8. Graphical Display Settings
Displ|
----------------------------------------
NUM|Select->|
Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.
Ship Settings Menu Example:
N/A
*********** Convoy Settings ************
Call Sign:OEZ1234
ShipName :INLAND SHIP
Ref.Points
Len (A+B):
Beam(C+D):
Len
Beam [dm]:
>>> DATA OK. PRESS M5 TO SAVE DATA <<<
----------------------------------------
Select and enter Call Sign (ATIS).
Select and enter Ship Name.
Enter external GPS Antenna Position
Enter internal GPS Antenna Position
Enter ship len and beam in [dm]
Y1-03-0212H
o o
23' E 0 16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
| +- 1. Messages
| +- 3. Voyage Settings
| +- 5. Transponder Configuration
| +- 7. Display Settings
|
|
N/A |1> N/A|2> N/A|3> N/Anm
ext int
A: 200m 220m
B: 20m N/A
C: 10m 10m
D: 33m 33m
220m 220m
43m 43m
[dm]: 2199dm
429dm
| Save | |
|<-Back
/\ +
/ \|
| |
| A
| |
| +--|
| | B
| | |
+-C-+D-+
| Back
37