Unpacking The Fma 4000 Mass Flow Meter; Inspect Package For External Damage; Unpack The Mass Flow Meter; Returning Merchandise For Repair - Omega FMA 4000 User Manual

1.

UNPACKING THE FMA 4000 MASS FLOW METER

1.1

Inspect Package for External Damage

Your FMA 4000 Mass Flow Meter was carefully packed in a sturdy cardboard car-
ton, with anti-static cushioning materials to withstand shipping shock. Upon
receipt, inspect the package for possible external damage. In case of external
damage to the package contact the shipping company immediately.
1.2

Unpack the Mass Flow Meter

Open the carton carefully from the top and inspect for any sign of concealed ship-
ping damage. In addition to contacting the shipping carrier please forward a copy
of any damage report to Omega7 directly.
When unpacking the instrument please make sure that you have all the items
indicated on the Packing List. Please report any shortages promptly.
1.3

Returning Merchandise for Repair

Please contact an OMEGA7 customer service representative and request a
Return Authorization Number (AR).
It is mandatory that any equipment returned for servicing be purged and neutral-
ized of any dangerous contents including but not limited to toxic, bacterially infec-
tious, corrosive or radioactive substances. No work shall be performed on a
returned product unless the customer submits a fully executed, signed SAFETY
CERTIFICATE. Please request form from the Service Manager.
2.

INSTALLATION

2.1

Primary Gas Connections

Please note that the FMA 4000 Mass Flow Meter will not operate with liquids. Only
clean gases are allowed to be introduced into the instrument. If gases are con-
taminated they must be filtered to prevent the introduction of impediments into the
sensor.
1