Adjusting The Cec Settings; Turning The Led Indicator On Or Off - Vizio E420i-A0 User Manual

Adjusting the CEC Settings

The CEC function on your TV enables you to control
HDMI-connected devices with the included remote without any
additional programming.
Not all HDMI devices support CEC. See your device's
user manual for details.
To enable, disable, or adjust CEC settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight the
Settings icon and press OK. The Settings menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC
Settings and press OK. The CEC Settings menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC Function - To use CEC, you must select On.
• System Audio Control - When system audio control is on,
you can control your device's audio using the TV's remote
control.
• Device Discovery - Use this function to determine if your
device is connected and supports CEC.
5. Press the EXiT button on the remote.

Turning the LED indicator On or Off

The LED Indicator on the front of your TV can be set to light up
when the TV is on. You can change this setting if you prefer the
light to be off.
To turn the LED Indicator Light on or off:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight the
Settings icon and press OK. The Settings menu is displayed.
3. Highlight Power indicator and press OK.
4. Use the Up/Down Arrow buttons to select On or Off, then
press OK.
38
5