This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating.
Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent To get the most out of your new VIZIO product, read these your TV from being damaged, the following instructions should...
source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer • Use only with the cart, stand, tripod, bracket, or local power company. or table specified by the manufacturer, or sold with the apparatus.
be used for long period of time. This will protect your TV polarities may cause the batteries to leak which can from damage due to power surges. damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire •...
TeleVision anTenna ConneCTion lightning Protection ProTeCTion For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable If an outside antenna/satellite dish or cable system is to be system.
Table of Contents Installing the TV ..........3 Adjusting the Advanced Picture Settings ......22 Adjusting the Color Temperature ........23 Inspecting the Package Contents ........3 Adjusting the Picture Size and Position ......23 Installing the TV ..............3 Resetting the Picture Settings .........
Restoring the TV to Factory Default Settings ....37 Performing a Service Check ..........37 Using the Info Window ............38 Using the USB Media Player ......39 Using the USB Media Player ..........39 Connecting a USB Thumb Drive to the TV ......39 Playing USB Media ............
• It is pushed, pulled, or otherwise improperly moved • If an earthquake occurs and the TV is not properly secured VIZIO LED HDTV with Stand Quick Start Guide 2 x Rubber Feet Remote Control Power Cord 2 x Phillips Screws...
To install the base: 1. Place the TV screen-down on a clean, flat surface. To prevent 2. Insert and tighten the two(2) included Phillips screws into scratches or damage to the screen, place the TV on a soft the base with a Phillips screwdriver. (Not included) surface, such as a blanket.
Controls and Connections HDMI - Connect HDMI device. PC Audio In - Connect 3.5mm audio cable from PC. RGB - Connect VGA cable from PC. Coaxial - Connect coaxial cable from cable, satellite, or antenna. Stereo Audio Out - Connect 3.5mm audio device, such as sound bar.
remote Control InPut Power Change the currently-displayed input. Turn TV on or off. menu exIt Display the on-screen menu. Close the on-screen menu. arrow Navigate the on-screen menu. Select the highlighted menu option. GuIde BaCk Display the info window. Go to the previous on-screen menu. V Button Open the USB photo viewer.
Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.
Connecting Your Devices ConneCting A DeviCe Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). Cable/Satellite Box 2. Turn the TV and your device off. 3.
CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES Av CABLe CoMPonent CABLe HDMi CABLe AV cables (or Composite cables) are the Component cables are designed to carry high HDMI intelligent, all-digital interface traditional way of connecting your devices to definition video signals along with additional that delivers...
2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. VIZIO Sound Bar HDMI CABLE • CFC 2-WAY COMMUNICATION • 2.0-5.1 DIGITAL AUDIO BEST •...
CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES 3.5MM CABLe HDMi CABLe AV cables (or Composite cables) are the traditional way HDMI technology transmits crystal-clear digital of connecting your devices to your audio device. Audio multi-channel surround audio through a single HDMI signals are sent over the 3.5mm connector.
CONNECTING AN AUDIO DEVICE - ARC Without HDMI ARC With HDMI ARC Built-in Tuner Built-in Tuner Your TV Your TV With an HDMI ARC setup, the Without an HDMI ARC setup, audio connection between your TV will transmit audio your TV and Home Audio signal from the built-in tuner Receiver can be removed.
Completing the First-Time Setup The first time you turn on the TV, the Setup App will guide you 4. Use the OK and Arrow Up/ through each of the steps necessary to get your TV ready for use. Down buttons on the remote to highlight your time zone and Before you begin the first-time setup: press OK.
Use the Arrow buttons to highlight From this menu, you can: a menu option, and press the • Change the input source MENU/OK button to select that VIZIO option. • Change the screen aspect ratio • Set up closed captioning •...
1. Press the MENU button on the To change the input device: Screen Mode remote. 1. Press the MENU button on the VIZIO 2. Use the Arrow buttons to Wide Zoom Normal Panoramic remote. The on-screen menu is highlight the Wide icon.
To change the appearance of digital closed captions: 1. From the Closed Caption VIZIO If the program you are viewing is not being broadcast menu, use the Arrow buttons to with closed captions, the TV will not display them.
To set the Auto Power Off feature: 1. Press the MENU button on the 1. From the Sleep Timer menu, use the Up/Down Arrow buttons VIZIO remote. The on-screen menu is on the remote to highlight Auto Power Off and press OK. The displayed.
To adjust the picture settings: Backlight - Adjusts the LED brightness to affect the 1. Press the MENU button on the overall brilliance of the picture. VIZIO remote. The on-screen menu is Brightness - Adjusts the black level of the picture. displayed.
To adjust the advanced picture settings: 4. When you have finished adjusting the Advanced Picture 1. From the Picture Settings menu, Settings, press the EXIT button on the remote. VIZIO use the Arrow buttons on the remote to highlight More, then press OK.
To adjust the color temperature: To adjust the picture size and position: 1. From the Picture Settings Menu, 1. Ensure the input is set to ATV, VIZIO use the Arrow buttons to HDMI, or RGB. highlight More, then press OK.
Resetting the Picture Settings To reset the picture settings to the factory default settings: 1. From the Picture Settings menu, use the Arrow buttons to highlight More, then press OK. 2. Use the Arrow buttons on the remote to highlight Reset Picture Mode, then press OK.
(This setting is only available when 1. Press the MENU button on the SRS TruSurround HD is set to Off.) Change the equalizer VIZIO remote. The on-screen menu is presets by selecting Jazz, Classical, Pop, Rock, or Flat.
Adjusting the Advanced Audio Settings To adjust the advanced audio settings: Using the settings menu, you can: 1. From the Audio Settings Menu, • Change the input source VIZIO use the Arrow buttons to VIZIO • Adjust the Tuner settings highlight Advanced Audio, then press OK.
Changing the Input Source Setting the Tuner Mode To change the input source from the Settings menu: If you are using a device that is connected to the RF input, such as an external antenna or cable TV connection, you must set the 1.
1. From the Tuner menu, highlight Partial Channel Search. The 1. From the Tuner Settings menu, Partial Channel Search menu is displayed. VIZIO highlight Auto Channel Scan. The auto channel scan begins. 2. Highlight Scan Mode and select the type of channel you...
To add a single new analog channel: Skipping Channels 1. From the Tuner Settings menu, To quickly access the Input Source menu, press the VIZIO highlight Add Analog Channel INPUT button on the remote. and press OK. The Add Analog Channel menu is displayed.
To use the Digital MTS feature: Some digital free-to-air and cable channels broadcast programs 1. From the Tuner Settings menu, VIZIO in more than one language. The TV’s MTS (Multichannel Television highlight Digital MTS and press Sound) feature allows you to listen to audio in your preferred OK.
Using the Parental Controls Enabling or Disabling Program Ratings The TV’s parental controls allow you to prevent the TV from To manage program content according to its rating, you must displaying certain channels or programs without a password. enable the Program Rating feature. To enable or disable the Program Rating feature: Accessing the Parental Controls Menu 1.
Blocking and Unblocking Content by Rating Changing the Parental Control Passcode A channel may sometimes broadcast programs that are meant If you use the parental controls, you should change the passcode for children, and at other times broadcast programs that are to prevent children from accessing inappropriate material.
To change the on-screen menu language: can rename that input to display “DVD Player”. 1. Press the MENU button on the To change the name of an input: VIZIO remote. The on-screen menu is 1. Press the MENU button on the displayed.
You can use the TV’s Help menu to: when the TV is on. You can change this setting if you prefer the light to be off. • Display system information VIZIO To turn the Power Indicator Light on or off: • Reset the TV settings •...
Displaying System Information Resetting the TV Settings To display a summary of the TV settings: To reset the TV’s picture and audio settings: 5. Press the MENU button on the remote. The on-screen menu is 1. Press the MENU button on the remote. The on-screen menu is displayed.
Restoring the TV to Factory Default Settings All of the on-screen menu settings can be reset to the factory defaults. If you restore the TV to the factory default settings, all changes you have made to the settings will be lost! To restore the TV to its factory default settings: 1.
uSiNg the iNfO WiNdOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote: • Press the INFO or GUIDE button one time to display channel and input information. • Press the INFO or GUIDE button two times to display the program title and closed captioning information.
Using the USB Media Player USing the USB Media Player Playing USB Media To play USB media, you must first save your images onto a USB The USB Media Player allows you to connect a USB thumb drive to thumb drive. your TV and view photos.
Sources the previous screen. Current Folder the arrow and OK buttons Displays Displays the folder path. on the remote. connected USB devices. To VIZIO change source, Photo VIZIO_2GB\Photo\root highlight it and USB1: press OK. Current Folder root A.jpg B.jpg...
Troubleshooting & Technical Support do you have questions? Let us heLP! youR PRoduCt inCLudes FRee LiFetiMe teCh suPPoRt the viZio support team is highly trained and is based in the united states. We can help with: • new Product setup •...
The TV displays “No Signal.” There is no sound. • Press the inPut button on the remote control to select a • Press volume up on the remote control. different input source. Press the MUTE button on the remote to ensure mute is •...
The image quality is not good. I see “noise” or static on the screen. • For the best image quality, view high-definition • When your tv’s digital capabilities exceed a programs using digital sources. Connect your devices digital broadcast signal, the signal is up-converted with hdMi cables.
E221-A1 OSD Language: English, Spanish, French Remote Control Model: XRT020 CSA, CSA-US, FCC Class B, Certifications: HDMI 1.4, Dolby digital Plus Compliance: Energy Star Voltage Range: 120V @ 60 Hz Power Consumption: 25.8W Standby Power: <1W Zero Bright Pixel Guarantee:...
Covers units purchased as new in United States and Puerto Rico Only. or removed serial numbers, or requiring routine maintenance are not VIZIO provides a warranty to the original purchaser of a new Product covered. This one year limited warranty does not cover Products sold against defects in materials and workmanship for a period of one (1) “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
Legal & Compliance FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.