TO SELECT ANALOG CHANNELS
1-9:
Press 1-9 as needed. Example, to
select channel 2, press 2, then press
ENTER.
10-99:
Press the 2 digits in order. Example,
to select channel 12, press 1, 2, then
press ENTER.
100-135: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0, then
press ENTER.
TO SELECT DIGITAL CHANNELS
Press the first 1-3 digits, then press the – button,
followed by the remaining number.
Example, to select channel 15-1, press 1, 5, –, 1,
then press ENTER.
•
If a channel is selected with only audio content,
“Audio only” will be displayed on the screen.
•
If a channel is selected with a weak digital
signal, “Digital channel signal strength is low”
will be displayed on the screen.
The same program may be available on either
an analog channel or a digital channel. You may
choose to watch either format.
•
If a channel is selected to which you have not
subscribed, “Digital channel is encrypted” will
be displayed on the screen.
VHF/UHF/CABLE CHANNELS
Air
Cable
VHF
VHF
2-13
2-13
UHF
STD/HRC/IRC
14-69
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-135
(100) (135)
01
(4A)
NOTE:
•
If a channel with no broadcast is selected, the
sound will automatically be muted.
•
It may take a few seconds for a digital channel
picture to appear on screen after being selected.
To select the video input source
To view a signal from another device connected
to your TV, such as a VCR player, press INPUT
SELECT, then press ▲ or ▼ or corresponding
Number buttons (0-5), then press ENTER.
Input Select
0.TV
1.Video
2.Component
3.HDMI
4.PC
5.DVD
[0-5]:Select
CH
/
Press and release CH
/
. The channel
automatically stops at the next channel set into
memory.
For proper operation, before selecting channels, they
should be set into the memory. See “Memorizing
channels” on page 18.
15 EN