System Board Drive Connections - HP Elite 7000 - Microtower PC Maintenance And Service Manual

CAUTION:
If you are inserting or removing a drive, shut down the operating system properly, turn off the computer,
and unplug the power cord. Do not remove a drive while the computer is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid
touching the connector.
Handle a drive carefully; do not drop it. Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields
such as monitors or speakers.
If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label
the package "Fragile: Handle With Care."

System Board Drive Connections

Refer to the following illustration and table to identify the system board drive connectors.
Figure 7-16
Table 7-3 System Board Drive Connections
No. System Board Connector
1 SATA1
2 SATA2
3 SATA3
4 SATA4
5 Media Card Reader
To prevent loss of work and damage to the computer or drive:
System Board Drive Connections
System Board Label
SATA1
SATA2
SATA3
SATA4
JUSB2
Color
dark blue
white
light blue
orange
white
Drives 45