Useful Information; Wall Mounting - Panasonic KX-TG7875S Operating Instructions Manual

Wall mounting

The base unit can be mounted on a wall by
changing the wall mounting adaptor's position.
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
R Model shown is KX-TG7841 series.
Base unit
1
To remove the wall mounting adaptor,
push down the release levers (A).
Remove the adaptor (B).
B B
A A
2
A Turn the adaptor so that the words
"UP WALL" are facing up.
B Tuck the telephone line cord inside the
wall mounting adaptor.
C Connect the AC adaptor cord and
telephone line cord.
3
1
For assistance, please visit http://www.panasonic.com/help
B B
A A
Hook
2
3
Insert the lower tabs of the adaptor into
the unit's bottom slots (A), then insert by
pushing down the levers of the adaptor
into the upper slots (B).
R The words "UP WALL" should be
facing up.
4
Mount the unit on a wall then slide down
to secure in place.
Wall phone plate
83 mm
1
1
(3 / inches)
4
2
Charger
Drive the screws (not supplied) into the wall.

Useful Information

B B
B B
A A
A A
1
83 mm
1
(3 / inches)
4
or
102 mm
(4 inches)
2
102 mm
(4 inches)
27.2 mm
1
( / inches)
16
Screws
67