HP DL360 - ProLiant - G3 Setup And Installation Manual page 110

Battery
4. Remove the existing battery.
Figure G-1: Removing the system battery
5. Install the new battery.
6. Reinstall the Battery-Backed Write Cache enabler battery pack.
7. Reverse the procedures performed in the "Accessing Internal Server
Components" section in Chapter 2, "Installing Hardware Options."
8. Run the ROM-Based Setup Utility to reconfigure the system with the new
battery. See Chapter 4, "Server Configuration and Utilities."
G-2 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide