Appendix G Battery; Battery Replacement - HP DL360 - ProLiant - G3 Setup And Installation Manual

The HP ProLiant DL360 Generation 3 server has one memory device that requires a
battery for retaining stored information.
When the server no longer automatically displays the correct date and time, the
battery that provides power to the real-time clock may need replacement. With
normal use, battery life is usually about 5 to 10 years. Replace used batteries with HP
540-milliampere-hour lithium, 3 V replacement batteries (P/N 179322-001).

Battery Replacement

WARNING: To reduce the risk of electric shock or equipment damage:
•
•
•
To install a new battery:
1. Access internal server components. Refer to "Accessing Internal Server
Components" in Chapter 2, "Installing Hardware Options."
2. Remove the Battery-Backed Write Cache enabler battery pack.
3. Locate the battery holder on the system board. Refer to Figure 2-4 and Table 2-1
in Chapter 2, "Installing Hardware Options."
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
Disconnect power from the server or other product by unplugging the
power cord from either the electrical outlet or the server or other product.
G
Battery
G-1