Samsung BD-F7500 User Manual page 40

Media Play
| NOTES |
\ If the index information in the file
is damaged or the file does not
support indexing, you will not be
able to use the Search Scene
Search Scene
function.
\ If you are using the Allshare function
after connecting to a computer
through your network, Search
Scene may not be supported.
If there is more than one movie on the
disc or device, select to start a different
title.
1. Select Search Titles, and then
Search Titles
press the v button.
2. Use the ▲▼ buttons to select
a title, and then press the v
button.
Select to play the chapter of your
choice.
1. Select Search Chapters, and then
Search
press the v button.
Chapters
2. Use the ▲▼ buttons to select a
chapter, and then press the v
button.
Select to play the movie from a
selected time point.
1. Select Search Time Bar, and then
press the v button.
2. Using the number buttons, enter
the time point you want to go to,
Search Time
and then press the v button.
Bar
| NOTES |
\ You can also use the ◄► buttons
to advance or rewind the movie.
The movie advances or rewinds one
minute each tme you press the ◄
► buttons.
40
|
English
Select to repeat a title, chapter, or
specific section.
- Off : Select to return to normal
playback.
- Title : Choose to repeat a selected
title.
- Chapter : Choose to repeat a
specific chapter.
- Repeat A-B : Choose to repeat a
specific section.
1. Press the ▲▼ buttons to select
repeat A-B, and then press the
Repeat Mode
v button.
2. Press the v button at the point
where you want repeat play to start
(A). Let the movie play.
3. Press the v button at the point
where you want repeat play to stop
(B).
| NOTES |
\ You must set point (B) at least 5
seconds of playing time after point
(A).
Select to set the picture mode.
- Dynamic : Increases sharpness and
brightness.
- Standard : Choose this setting for
most viewing applications.
- Movie : The best setting for
watching movies.
Picture Mode
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
| NOTES |
\ When you use the BD wise function,
this menu will not appear.
Select to set the desired audio
Audio
language.