Getting Started Getting Started Safety Information Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only CAUTION that appliance and has no additional outlets or branch circuits. Check the specification page of this RISK OF ELECTRIC SHOCK owner’s manual to be certain.
Your city office, waste disposal service or the shop where You purchased the product. LG Electronics hereby declares that this/ these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/ EC, 2006/95/EC and 2009/125/EC.
Table of Contents Table of Contents Operating Operations – DOLBY DRC (Dynamic Range Control) Getting Started – AV Sync – AUTO POWER DOWN Safety Information – AUTO POWER On/Off Accessories – Turn off the sound temporarily Introduction Controlling a TV with the Supplied –...
Getting Started Accessories Introduction Symbols Used in this Manual Please check and identify the supplied accessories. Note Indicates special notes and operating features. > Caution Indicates cautions for preventing possible damages Remote control (1) Batteries (1) from abuse. Wall Mount Bracket Wall bracket (2) Installation Template Optical cable (1)
Getting Started Front panel A 1 (Standby/On) B – / + (Volume) Adjusts speaker volume. Rear panel A S/W Download Connector - Only for service. B OPTICAL IN NB2020A-N0.DDEULL_ENG_4451.indd 8 2012-07-06 10:20:52...
Getting Started Installing the sound Installing the cover foot You can hear the sound by connecting the unit to You can extend the height of the unit. the other device : TV, Blu-ray disc player, DVD player, etc. Place the unit in front of the TV and connect it to the device you want.
Connecting Mounting the main 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill unit on a wall some holes. A guide sheet (Wall Mount Bracket Installation Template) is supplied to drill. Use the sheet to check the point to drill.
Connecting Note 3. Remove the Wall Mount Bracket Installation Template. Detach the unit from the bracket as shown below. 4. Fix it with screws (not supplied) as shown in the illustration below. Optional Equipment Connection OPTICAL In connection Connect an optical output of external devices to the OPTICAL IN connector.
Operating Operating Operations AUTO POWER On/Off This function is automatically turns on/off the unit when you turn on/off the external device (TV, DVD player, Blu-ray player etc.) connected to the unit DOLBY DRC (Dynamic Range by optical cable. Turn on this function by pressing Control) AUTO POWER ON.
Operating Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. (LG TV only.) Button Operation Turn the TV’s volume on or MUTE Switch the TV’s input source INPUT between the TV and other input sources.
Troubleshooting Troubleshooting PROBLEM CORRECTION Plug in the power cord. No Power Check the condition by operating other electronic devices. Check the OPTICAL IN connection. No sound The remote control is too far from the unit. Operate the remote control within about 23 ft (7m). The remote There is an obstacle in the path of the remote control and the unit.
Appendix Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean y Do not use volatile liquids such as insecticide spray near the unit.
Appendix Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, &...
Appendix Specifications General Power requirements AC 200 - 240 V , 50 / 60 Hz Power consumption 11 W Dimensions (W x H x D) (900 x 59 x 85) mm Net Weight (Approx.) 2.6 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Inputs...