D-Link DCS-5605 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Security Camera
  5. SECURICAM DCS-5605
  6. User manual
D-Link DCS-5605 User Manual

D-Link DCS-5605 User Manual

Wireless n/wired poe ptz h.264 network camera
Hide thumbs Also See for DCS-5605:
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
DCS-5605/5635
VERSION 1.20

Advertisement

Table of Contents
loading

Related Manuals for D-Link DCS-5605

Summary of Contents for D-Link DCS-5605

  • Page 1 USER MANUAL DCS-5605/5635 VERSION 1.20...

  • Page 2: Table Of Contents

    Advanced ..............64 Testing the DCS-5605/5635 ........37 ICR ................ 64 Viewing Your DCS-5605/5635 ....... 38 Digital Output ............65 Using the DCS-5605/5635 with an Internet Browser . Maintenance ............... 66 Admin ..............66 Live Video..............40 System ..............68...
  • Page 3 Play from RealPlayer ........83 Play from PVPlayer .......... 88 Troubleshooting ............91 Wireless Basics ............94 Networking Basics ............ 99 Check your IP Address .......... 99 Statically Assign an IP Address ......100 Technical Specifications......... 101 D-Link DCS-5605/5635 User Manual...

  • Page 4: Product Overview

    Section 1 - Product Overview Product Overview Package Contents • D-Link DCS-5605/5635 Wireless N/Wired PoE PTZ H.264 Network Camera • CAT5 Ethernet Cable • Power Adapter • A/V Cable • Mounting Plate • Mounting Screws • Manual and Software on CD •...

  • Page 5: Introduction

    80% compared to Motion JPEG. Thus, less network bandwidth and storage space is required. SURVEILLANCE ON THE GO The DCS-5605/5635 supports 3GPP mobile surveillance. A live feed from the camera can be accessed on a 3G cellular network using a compatible phone, PDA or mobile device capable of RTSP (Real Time Streaming Protocol) streaming.
  • Page 6 EASY TO INSTALL AND SIMPLE TO MANAGE The DCS-5605/DCS-5635 can be mounted on a flat surface or with a metal ceiling mount. Manage and monitor up to 32 cameras using D-Link’s D-ViewCam software. You can also set up automated e-mail alerts to be instantly informed of unusual activities.

  • Page 7: Hardware Overview

    Power LED The Power LED will illuminate red when the camera is receiving power. Microphone This built-in microphone can be used capture audio from sources nearby the camera. D-Link DCS-5605/5635 User Manual...

  • Page 8: Rear

    Ethernet Port Connect an Ethernet cable to a router, switch, or computer. The Ethernet port can also be used to power the camera using a PoE switch (DCS-5605 only) DC Power Connector The DC Power input connector is labeled DC 12V with a single jack socket to supply power to the DCS-5605/5635.
  • Page 9 Connect a 3.5mm audio cable for input from a microphone. Reset Depress this button with a straightened paper clip for about 20 seconds to reset the camera to factory default settings. Antenna connector(DCS-5635 Only) Connects to the wireless antennas D-Link DCS-5605/5635 User Manual...

  • Page 10: Right Panel

    Section 1 - Product Overview Right Panel MicroSD Card Slot Insert a standard MicroSD card into this slot for image storage. D-Link DCS-5605/5635 User Manual...

  • Page 11: Di/Do Input Specifications

    As the Digital Input signal is controlled by an external device, we recommend that you set your device to feed no current normally, and feed a 12V current only to trigger a DI event on the DCS-5605/5635. Example use of DI/DO: You can connect a motion sensor to the DI port, signaling the camera to take a snapshot and to trigger an alarm connected to the DO port.

  • Page 12: Mounting Instructions

    Section 1 - Product Overview Mounting Instructions The DCS-5605/5635 can be mounted on a ceiling using the included mounting bracket and screws. 1. Use 3 screws to affix the metal mounting bracket to the ceiling. 2. Push the camera up onto the metal mounting bracket.
  • Page 13 Section 1 - Product Overview 4. Install the final screw so that the camera cannot be 3. Rotate the base of the camera to lock it onto the bracket. removed without the use of a tool. D-Link DCS-5605/5635 User Manual...

  • Page 14: Wireless Installation Considerations

    RF (radio frequency) noise in your home or office. The key to maximizing the wireless range is to follow these basic guidelines: 1. Minimize the number of walls and ceilings between the D-Link router and other network devices. Each wall or ceiling can reduce your adapter’s range from 3 to 90 feet (1 to 30 meters).

  • Page 15: Software Installation

    Section 2 - Installation Software Installation Turn on the computer and Insert the D-Link DCS-5605/5635 Driver CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows XP. The steps and screens are similar for the other Windows operating ®...
  • Page 16 Section 2 - Installation Click Next to continue. Click Next Click Yes to accept the License Agreement. Click Yes D-Link DCS-5605/5635 User Manual...
  • Page 17 Section 2 - Installation To start the installation click Next. Note: The installation may take several minutes to complete. Click Next D-Link DCS-5605/5635 User Manual...
  • Page 18 Section 2 - Installation Click Finish to complete the installation. Click Finish D-Link DCS-5605/5635 User Manual...
  • Page 19 Section 2 - Installation Now, click on ffdshow from the autorun screen. This will install the proper codecs that will allow you to playback video taken by the DCS-5605/5635. Click ffdshow Click I Agree D-Link DCS-5605/5635 User Manual...
  • Page 20 Section 2 - Installation Select Language, and then click OK. Click OK Click Next D-Link DCS-5605/5635 User Manual...
  • Page 21 Section 2 - Installation Click Next Click Next D-Link DCS-5605/5635 User Manual...
  • Page 22 Section 2 - Installation Click Next Click Next D-Link DCS-5605/5635 User Manual...
  • Page 23 Section 2 - Installation Click Next Click Next D-Link DCS-5605/5635 User Manual...
  • Page 24 Section 2 - Installation Select the speaker from your PC, and then click Next. Click Next Click Install D-Link DCS-5605/5635 User Manual...
  • Page 25 Section 2 - Installation Installing Click Finish D-Link DCS-5605/5635 User Manual...

  • Page 26: Enabling Upnp For Windows ® Xp

    UPnP (Universal Plug and Play) is a networking architecture that provides compatibility among networking equipment, software, and peripherals. The DCS-5605/5635 is an UPnP enabled Internet camera. If your operating system is UPnP enabled, the device will be easier to configure. If you do not want to use the UPnP functionality, it can be disabled by unchecking the Enabled UPnP checkbox on the Setup >...
  • Page 27 Section 3 - Configuration Click Add/Remove Windows Components The following screen will appear. Select Networking Services. Click Details Select Universal Plug and Play. Click OK D-Link DCS-5605/5635 User Manual...
  • Page 28 Section 3 - Configuration Click Next Please wait while Setup configures the components. Click Finish D-Link DCS-5605/5635 User Manual...
  • Page 29 Section 3 - Configuration To view your DCS-5605/5635 Internet Camera in an Internet browser, go to your Desktop and click My Network Places. Click DCS-5605/5635 (192.168.0.120). DCS-5635 (192.168.0.120) D-Link DCS-5605/5635 User Manual...
  • Page 30 Section 3 - Configuration After you click on the DCS-5605/5635 icon, your Internet browser will automatically be opened to the IP Address of the DCS-5605/5635, in this example it is: http://192.168.0.120. Your DCS-5605/5635 may have a different IP Address. http://192.168.0.120/eng/index.cgi...

  • Page 31: Configuration

    Section 3 - Configuration Configuration This section will show you how to configure your new D-Link Network Camera using the Setup Wizard. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Click D-Link Setup Wizard SE...
  • Page 32 Section 3 - Configuration The Setup Wizard will appear and show the MAC address of the DCS-5605/5635 and an IP Address (which may or may not be correct depending on what you have your DCS-5605/5635 connected to). If you have a DHCP server on your network, there will be a valid IP Address displayed here.
  • Page 33 Section 3 - Configuration Select DHCP if you want to obtain a new IP address every time the camera boots up. Click Next Select static IP to use the same IP address at each boot up. Click Next D-Link DCS-5605/5635 User Manual...
  • Page 34 Click the button labeled Link to access the web configuration page. The Setup Wizard will automatically open your web browser to the IP address of the DCS-5605/5635, in this example it is: http://192.198.0.185. Your DCS-5605/5635 may have a different IP Address.

  • Page 35: Web-Based Configuration Utility

    Section 3 - Configuration Web-based Configuration Utility This section will show you how to configure your new D-Link Network Camera using the Web-based Configuration Utility. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address for your Network Camera (http://192.168.0.185)
  • Page 36 D-ViewCam Setup Wizard D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to configure all the advanced settings for your cameras. D-ViewCam is a comprehensive man- agement tool for IP surveillance.
  • Page 37 Click Finish to complete the installation. To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console. For more detail operation of using D-ViewCam software, please refer to D- ViewCam Manual. D-Link DCS-5605/5635 User Manual...

  • Page 38: Setting Up A Wireless Connection With Wps

    Note: On some routers/access points, you may need to enter the web interface to activate WPS. Consult your product’s user manual for further assistance. WPS Button Press this button to establish a WPS connection. D-Link DCS-5605/5635 User Manual...

  • Page 39: Testing The Dcs-5605/5635

    Section 3 - Configuration Testing the DCS-5605/5635 Open your Internet browser and type in the IP address of the DCS-5605/5635. In this example, the address is: http://192.168.0.120 (your DCS-5605/5635 may have a different IP address based on what you used in the Setup Wizard SE program).

  • Page 40: Viewing Your Dcs-5605/5635

    (e.g., 192.168.0.120:83). If you are following this manual in the order it is presented, you should now have an operating DCS-5605/5635 Internet Camera configured with the Installer program. This section of the manual will cover how to use the Internet Camera in two methods: •...

  • Page 41: Using The Dcs-5605/5635 With An Internet Browser

    Section 3 - Configuration Using the DCS-5605/5635 with an Internet Browser Open your Internet Explorer Web browser and enter the IP address for your Internet Camera (http://192.168.0.120). In the example, this address is 192.168.0.120. Your address may differ. If a window appears asking to install a Verisign certificate for authentication click Yes. This allows the proprietary MPEG4 video stream to be recognized by Internet Explorer.

  • Page 42: Live Video

    Section 3 - Configuration Live Video The live image feed from the DCS-5605/5635 should be visible from the device’s Live Video page on your web browser. Logout: Click on the Logout button to logout from the camera server and close the browser.
  • Page 43 This area displays the current status of the SD card. Language: If desired, you may choose a different language from the drop-down list. The bottom of this page contains several icons which can be used to control the camera’s main functions. D-Link DCS-5605/5635 User Manual...
  • Page 44 This button will toggle the digital output on or off. Digital Zoom: This button toggles the zoom feature on and off. When zoom is active, you may left click to zoom in or right click to zoom out. D-Link DCS-5605/5635 User Manual...

  • Page 45: Dcs-5605/5635 Configuration

    There are 5 tabs across the top of the Configuration screen. The LIVE VIDEO page is used for viewing live video and audio. The SETUP page is used for basic setup of the DCS-5605/5635. The MAINTENANCE page is used for server system maintenance.

  • Page 46: Wizard

    Manual Internet Connection Setup, and you can manually set up motion detection options by clicking on Manual Motion Detection Setup. You can also see these settings by clicking on their categories on the left side (Network Setup/ Wireless Setup/ Motion Detection/ Snapshot). D-Link DCS-5605/5635 User Manual...

  • Page 47: Network Setup

    Section 3 - Configuration Network Setup DHCP: DCS-5605/5635 will request a new IP address from the DHCP server every time it restarts. Once the DCS-5605/5635 is configured, this radio should be deselected at all times. If this radio button has been selected and the connection is lost, run the Setup Wizard SE find the camera’s IP address.

  • Page 48: Https Settings

    After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. HTTPS settings Enable HTTPS: This is default enabled. HTTPS only: Select this will redirect all the HTTP connection to HTTPS pages automatically. D-Link DCS-5605/5635 User Manual...

  • Page 49: Wireless Setup (Dcs-5635 Only)

    If you use WEP, WPA-PSK, or WPA-PSK2 authentication, enter the Key (also known as password) used for your wireless network. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5605/5635 User Manual...

  • Page 50: Dynamic Dns

    DSL connections, you are assigned a dynamic IP address and that address is used only for the duration of that specific connection. With the DCS-5605/5635, you can set up your DDNS service and the DCS-5605/5635 will automatically update your DDNS server every time it receives a different IP address. Depending on the service, this update may take a few hours.

  • Page 51: Image Setup

    Note: Mirror and Flip can be used if you choose to mount the DCS-5605/5635 upside down on the ceiling. Auto Gain Control: Controls the gain of a signal. Using AGC means that weaker signals receive more gain and stronger signals receive less gain or none at all.
  • Page 52 With the “On” option, the distribution of brightness values is automatically adapted to the recording scenario. De-interlace: The De-interlacing option helps to improve the image quality. It reduces the effects of interlacing. Click this checkbox to set “de-interlacing on” D-Link DCS-5605/5635 User Manual...

  • Page 53: Audio And Video

    This sets the target bitrate of the video stream. Higher bitrates will provide better quality video. When the Encode Type is set to MJPEG, you cannot change the bps setting. Also, available bps settings may change depending on what the Encode Type, Sensor Output, Resolution, and FPS settings are set to. D-Link DCS-5605/5635 User Manual...
  • Page 54 For best viewing results on a mobile phone, we suggest setting the frame rate to 5 fps and bit rate to 20 Kbps. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5605/5635 User Manual...

  • Page 55: Motion Detection

    Erase Motion Area: Clicking this button will clear all motion detection zones. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5605/5635 User Manual...
  • Page 56 No Motion Motion The motion notification will continue to blink as long as motion is detected. If no additional motion is detected, it will return to its original state after eight seconds. D-Link DCS-5605/5635 User Manual...

  • Page 57: Time And Date

    Adjust the date and time according to what is manually: selected by the administrator. Copy Your Computer’s time Synchronize the date and time of DCS-5605/5635 with your local computer. The date and time of the PC is Settings: displayed and updated in the DCS-5605/5635. D-Link DCS-5605/5635 User Manual...

  • Page 58: Preset Position

    Select a value between 1 and 3, 1 being the slowest setting. Current Position: Enter a name for the position at which you would like to preset the DCS-5605/5635. Click Add to add the new preset position to the Preset Locations list. Preset Position: Using the drop-down list, you can choose and delete a preset position by selecting it and clicking Delete.
  • Page 59 Selected Locations list by clicking Select. You can then select the order in which the camera will patrol through the preset locations by selecting a location and clicking Up or Down. Click Remove to remove a location from the list. D-Link DCS-5605/5635 User Manual...

  • Page 60: Patrol Position

    Select the step of camera Pan/Patrol movement between 1 and 5. Dwelling Time: This sets the duration of staying at the position. Patrol Schedule: “Patrol Schedule” allows the PTZ camera to perform the position tour by an hourly schedule. D-Link DCS-5605/5635 User Manual...

  • Page 61: Recording

    Enter the name or the IP of the server your Samba drive is on. Shared Folder: Enter the name of your shared folder. Test: This button will try to make a connection to the Samba network drive, and will let you know if the settings work. D-Link DCS-5605/5635 User Manual...
  • Page 62 DI/DO interface at the end of this document. Prerecord: This will set how many seconds of video before the event takes place will be recorded. Postrecord: This will set how many seconds of video after the event takes place will be recorded. D-Link DCS-5605/5635 User Manual...
  • Page 63 Samba drive. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5605/5635 User Manual...

  • Page 64: Snapshot

    Enter the SMTP server for your e-mail account. Sender E-mail Address: Enter the e-mail address you want to appear as the “From:” e-mail address in the snapshot e-mail. Recipient E-mail Address: Enter the e-mail address you want to send your snapshots to. D-Link DCS-5605/5635 User Manual...
  • Page 65 Some FTP servers allow clients to use passive mode when connecting to an FTP, which uses random ports for transfers. Test: Clicking this button will take a snapshot and will try to upload it to your FTP server using the settings you have entered. D-Link DCS-5605/5635 User Manual...

  • Page 66: Sd Card

    Playback Recorded Video: If video files are stored on the SD card, click on the video folder and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-5605/5635 User Manual...

  • Page 67: Advanced

    The camera will enter Day mode at the starting time and return to Night mode at the ending time. Note : When you enable the “Night Mode”, the live video will be changed to Black/White mode. D-Link DCS-5605/5635 User Manual...

  • Page 68: Digital Output

    When checked, the D/O port will send a signal whenever motion is detected by the camera. (When motion detection has been enabled) D/I: When checked, the D/O port will send a signal whenever a signal is detected on the Digital In (D/I) port. D-Link DCS-5605/5635 User Manual...

  • Page 69: Maintenance

    Section 3 - Configuration Maintenance Click on the Maintenance tab to access 3 utility screens for controlling and administering the DCS-5605/5635. The default screen for Maintenance is Device Management. Admin The DCS-5605/5635 is configured without any passwords by default. This allows anyone to access and configure the DCS-5605/5635 as long as the IP address is known.
  • Page 70 Should the camera’s pan, tilt, and zoom functions begin to behave incorrectly, or if the device has been jarred or handled improperly, you may need to recalibrate the camera manually by pressing this button. D-Link DCS-5605/5635 User Manual...

  • Page 71: System

    Clicking this button will restart the camera. Click Apply on this screen to restore the factory default settings. After confirmation, the system will restart and require the Setup Wizard SE program to locate the IP address of the DCS-5605/5635. D-Link DCS-5605/5635 User Manual...

  • Page 72: Firmware Update

    Firmware Update File Path: This option allows you to upgrade the firmware via a web browser. Click on Browse to locate the firmware file and then click on Upgrade to apply the firmware to the camera. D-Link DCS-5605/5635 User Manual...

  • Page 73: Status

    Section 3 - Configuration Status Device Info The Device Info screen lists the following important settings that are currently set for the DCS-5605/5635: • Camera Name • Time & Date • Firmware Version • Mac Address • IP Address • IP Subnet Mask •...

  • Page 74: Log

    The content of the log file reveals useful information about the current configuration and connection logged after the DCS-5605/5635 starts up. Clear: Click this button to remove all information in the log file. Download: Click this button to save the information in the log to a file. D-Link DCS-5605/5635 User Manual...

  • Page 75: Help

    Section 3 - Configuration Help The help page provides detailed information for the camera’s Web interface. D-Link DCS-5605/5635 User Manual...

  • Page 76: Wireless Security

    ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily. D-Link DCS-5605/5635 User Manual...

  • Page 77: What Is Wpa

    WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. D-Link DCS-5605/5635 User Manual...

  • Page 78: Configuration And Use With A Nat Router

    D-Link’s DCS-5605/5635 is a versatile and cost effective Internet Camera offering both video and audio monitoring. It can also serve as a powerful surveillance system in security applications. The DCS-5605/5635 can be used with any wired or 802.11n/g wireless router. This section explains how to view the camera from either the Internet or from inside your internal network.
  • Page 79 Run the setup wizard from the CD included with the DCS-5605/5635. Follow the steps in the Quick Installation Guide to configure the DCS-5605/5635. The camera will be assigned a local IP Address that allows it to be recognized by the router. Write down this IP Address for future reference.
  • Page 80 Run your Internet Explorer Web browser. In the address bar, type in the IP Address that was assigned to the Internet Camera by the Setup Wizard SE program. The DCS-5605/5635 Live Video Page appears with a window displaying live video from the camera. You are able to view this screen from any PC running Internet Explorer on your LAN.
  • Page 81 (e.g. in a multiple camera environment). Note: Both the HTTP port and RTSP port are required to be opened for the DCS-5605/5635. Please refer to page 82 on how to open ports in the router.

  • Page 82: Router Set-Up And Installation

    Router Set-Up and Installation The following steps generally apply to any router that you have on your network. The D-Link DIR-655 is used as an example to clarify the configuration process. Configure the initial settings of the DIR-655 by following the steps outlined in the DIR-655 Quick Installation Guide.
  • Page 83 5605/5635 over the Internet. The router connects to the Internet over a series of numbered ports. The ports normally used by the DCS-5605/5635 are blocked from access over the Internet. Therefore, these ports need to be made accessible over the Internet. This is accomplished using the Virtual Server function on the DIR-655 router. The Virtual Server ports used by the camera must be opened through the router for remote access to your camera.
  • Page 84 Enter valid ports in the Virtual Server section of your router. Please make sure to check the box next to the camera name on the Virtual Server List to enable your settings. D-Link DCS-5605/5635 User Manual...

  • Page 85: Using & Configuring 3G Compatible Cell Phones

    Section 4 - Security Using & Configuring 3G Compatible Cell Phones To enable mobile device video streaming, you will need to configure profile 4 for mobile viewing (see below). D-Link DCS-5605/5635 User Manual...

  • Page 86: Play From Realplayer

    Section 4 - Security Play from RealPlayer The following steps are based on a Nokia 6630 cell phone. Press the Menu button and select Media Select Open Select RealPlayer D-Link DCS-5605/5635 User Manual...
  • Page 87 Section 4 - Security Select Open When RealPlayer opens, press Options D-Link DCS-5605/5635 User Manual...
  • Page 88 Section 4 - Security Select Download Select Video Clips Note: 71.34.50.5 is the camera’s IP address in this sample. Press Options D-Link DCS-5605/5635 User Manual...
  • Page 89 Section 4 - Security Select Navigation Options Select Go to web address Input your rtsp address D-Link DCS-5605/5635 User Manual...
  • Page 90 Section 4 - Security Press Yes, and allow Connection and Loading of the streaming video. Enjoy streaming video on your cellphone. D-Link DCS-5605/5635 User Manual...

  • Page 91: Play From Pvplayer

    Section 4 - Security Play from PVPlayer Press the Menu button and select PVPlayer Select Open Press the Options button D-Link DCS-5605/5635 User Manual...
  • Page 92 Section 4 - Security Select Open location Input your rtsp address Note: 71.34.50.5 is the camera’s IP address in this sample. D-Link DCS-5605/5635 User Manual...
  • Page 93 Section 4 - Security Enjoy streaming video on your cellphone. D-Link DCS-5605/5635 User Manual...

  • Page 94: Troubleshooting

    Web browser. 2. What is the maximum number of users that can be allowed to access DCS-5605/5635 simultaneously? The maximum number of users that can log onto the Internet Camera at the same time is 10. Please keep in mind the overall performance of the transmission speed will slow down when many users are logged on.
  • Page 95 10. Why am I unable to access the DCS-5605/5635 from a Web browser? If a router or firewall is used on the network, the correct ports for the DCS-5605/5635 may not be configured on the router or firewall. To correct the problem, you need to determine if the DCS-5605/5635 is behind a router or firewall and if the router or firewall is properly configured for the ports the DCS-5605/5635 is using.
  • Page 96 The configuration on the Internet Camera image display is incorrect. Through the Image Setup section of the Web management you need to adjust the image related parameters such as brightness, contrast, hue and power line frequency for fluorescent light. Please refer to the Image Setup section on Page 49 for detailed information. D-Link DCS-5605/5635 User Manual...

  • Page 97: Wireless Basics

    Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
  • Page 98 Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
  • Page 99 Appendix A - Wireless Basics Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...
  • Page 100 Appendix A - Wireless Basics Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start.

  • Page 101: Wireless Modes

    An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DCS-5605/5635 User Manual...

  • Page 102: Networking Basics

    Check your IP Address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 103: Statically Assign An Ip Address

    2000 - From the desktop, right-click My Network Places > Properties. ® Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.

  • Page 104: Technical Specifications

    ƒ Reset Diagonal: 63° (Wide) to 7° (Tele) Protocols ƒ IPv4, ARP, TCP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (D-Link), SMTP Client, FTP Client, HTTP Server, Samba Client, PPPoE, UpnP Port Forwarding, RTP, RTSP, RTCP, 3GPP...
  • Page 105 Dimensions (L x W x H) ƒ 140.3 x 136.1 x 140.1 mm Weight ƒ DCS-5650: 810g ƒ DCS-5635: 855g Operating Temperature ƒ 0° to 40° (32° to 104°) Storage Temperature ƒ -20° to 70° (-4° to 158°) D-Link DCS-5605/5635 User Manual...

This manual is also suitable for:

Dcs-5635

Table of Contents