Motorola RDU2080d User Manual page 92

Programmable Via
RADIO PANEL
Features
Display
Cloning Mode Yes
CPS Manager
No
Lock
End of Tx
Tone (or
Yes
Roger Beep)
(2)
Frequencies Yes
90
Programmable via
CPS
Non- Non-
Display
Display Display
Yes Yes Yes
No Yes Yes
Yes Yes Yes
Yes Yes Yes
Default Value
Enables radio to enter cloning mode in order to
clone its profile settings into other radios (using
Radio to Radio Cloning Cable or Multi-Unit
OFF
Charger). Press PTT, SB2 while turning radio ON.
Note: You can clone radios using the CPS.
This feature is referred in the CPS software as
"Codeplug Password". It prevents unauthorized
N/A access to the CPS to the radio's programmed
configuration. Make sure you set up a 4 digits
password that is easy to remember.
To enable/disable press SB1 while powering up the
radio.
OFF
There are 27 VHF frequencies and 89 UHF
Channel and frequencies available. Use Programming Mode (1)
Model Dependant for front panel radio programming. Refer to
Frequencies and Codes Charts Section for details.
Programming Tips