Turning Setting Lock On/Off; Restricting Dialing; Dial Pad Restriction - Brother MFC-8910DW Advanced User's Manual

Turning Setting Lock on/off

If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Setting Lock on
a
Press Menu, 1, 8, 2.
18.Security
2.Setting Lock
a On
Set Password
b
Select ab or OK
b
Press a or b to choose On.
Press OK.
c
Enter your four-digit password.
Press OK.
d
Press Stop/Exit.
Turning Setting Lock off
a
Press Menu, 1, 8, 2.
18.Security
2.Setting Lock
Password:XXXX
Enter & OK Key
b
Enter your four-digit password.
Press OK twice.
c
Press Stop/Exit.

Restricting dialing

2
This feature is to prevent users from sending
a fax or calling a wrong number by mistake.
You can set the machine to restrict dialing
when you use the dial pad, One Touch,
Speed Dial and LDAP search
If you choose Off, the machine does not
restrict any dialing method.
If you choose Enter # twice, the machine
will prompt you to re-enter the number, and
then if you re-enter the same number
correctly, the machine will start dialing. If you
re-enter the wrong number, the LCD will
show an error message.
If you choose On, the machine will restrict all
fax sending and outbound calls for that
dialing method.
1
LDAP is included with MFC-8810DW and
MFC-8910DW. LDAP is available as a download for
MFC-8510DN and MFC-8710DW. You can
download LDAP from the Brother Solutions Center
at: http://solutions.brother.com/.

Dial pad restriction

a
Press Menu, 2, 6, 1.
26.Dial Restrict.
1.Dial Pad
On
a
Off
b
Select ab or OK
b
Press a or b to choose On, Off or
Enter # twice.
Press OK.
c
Press Stop/Exit.
Security features
2
1
.
2
13
2