Settings Assistant; Picture - Philips 50PFL3908/F7 User Manual

Settings assistant

Before you begin:
You must Set Home in Location. ➟ p.35
Otherwise, personalized Picture and Sound settings will not be
Memorized after the unit goes into Standby mode.
1
Press (MENU) and use ▲▼◄► to select Setup then press
OK.
2
Use ▲▼ to select Settings assistant, then press OK.
Settings assistant Start now

Picture

Sound
Features
Installation
Software
3
Press OK to begin Settings assistant.
4
Follow steps 8 to 11 in Initial setup.➟ p.18
Picture
Before you begin:
You must Set Home in Location. ➟ p.35
Otherwise, personalized Picture and Sound settings will not be
Memorized after the unit goes into Standby mode.
1
Press (MENU) and use ▲▼◄► to select Setup then press
OK.
2
Use ▲▼ to select Picture, then press OK.
Settings assistant Auto picture
Backlight
Picture
Contrast
Sound
Features
Brightness
Installation
Color
Software
Tint
Sharpness
Advanced settings
3
Use ▲▼◄► to select the item you want to adjust, then press
OK.
• The following picture settings can be configured. Depending on
the format of the picture Source, some picture settings are not
available.
to select the desired setting, then press OK
(Personal, Standard, Vivid, Sports, Movie, Game and
Auto picture
Energy saving and Internet video)
When you adjust the following settings, Personal
picture will be set automatically.
Cursor ◄
to reduce power
Backlight
consumption
Contrast
to decrease contrast
Brightness
to decrease brightness
to decrease color
Color
intensity
Tint to add green
Sharpness
to soften
to select the desired setting, then press OK
(Color alignment, Noise reduction, Light sensor*
Black stretch, Dynamic contrast, Gamma, Motion
Advanced settings
Rate, Dynamic backlight*
Color enhancement, Custom color management and
Film mode)
Automatic
Super zoom
4:3
Picture format Movie expand 14:9
Movie expand 16:9
Wide screen
Unscaled
27
English
Personal
Color alignment
Cursor ►
to set the backlight
brighter
to increase contrast
to increase brightness
to increase color intensity
to add red
to sharpen
1
,
2
, MPEG artifact reduction,
Changing picture format
➟ p.23
Continued on next page.