Page of 2
Download Bookmark Comment

Samsung UN32EH4003F User Manual

User manual ver.1.0 (spanish).
Hide thumbs
   
Plug & Play (Initial Setup)
How to use Edit Name
Getting Started
Connections
Changing the Input Source
When you turn the TV on for the first time, a sequence of on-screen
Edit Name lets you associate a device name to an input source. To
prompts will assist in configuring basic settings. Press the
POWER
access Edit Name, press the
TOOLS
button in Source List. The
Accessories
TV Rear Panel
Source List
button. Plug & Play is available only when the Input source is set to
following selections appear under Edit Name:
LED TV
TV.
Use to select TV or an external input source such as a DVD player /
Power Input
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
• Remote Control & Batteries (AAA x 2)
• Owner's Instructions
Connecting the power cord and antenna. (refer to
Blu-ray player / cable box / STB satellite receiver.
Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV
• Warranty Card / Safety Guide
• Wire-Holder Stand
'Connections')
/ Blu-ray / HD DVD / DMA: Name the device connected to the
• Power Cord
AV Device (1)
1. Press the
SOURCE
button.
input jacks to make your input source selection easier.
Using an HDMI Cable (up
user manual
Input Cables (Sold Separately)
Selecting a language
2. Select a desired external input source.
When connecting a PC to the
HDMI IN 1(DVI)
or
HDMI / DVI
to 1080p)
UN32EH4003 / UN39EH5003
IN
port with HDMI cable, you should set the TV to PC mode
Select the desired OSD (On Screen
Plug & Play
• HDMI
• Component
• Coaxial (RF)
UN32EH4003 / UN39EH5003
under Edit Name.
Display) language.
HDMI OUT
• HDMI-DVI
• Composite (AV)
Select Language of the OSD.
English
When connecting a PC to the
HDMI IN 1(DVI)
or
HDMI / DVI
■ TV / AV / Component / HDMI1/DVI / HDMI2
Language
Español
VHF/UHF Antenna
Check the cable before plug-in
IN
port with HDMI to DVI cable, you should set the TV to DVI
Français
PC mode under Edit Name.
UN22ES4003
Cable
Ports
Do not plug cable upside
U Move
E Enter
Blu-ray player / DVD / cable
When connecting an AV devices to the
HDMI IN 1(DVI)
or
down.
■ TV / AV / Component / HDMI/DVI
Contact SAMSUNG WORLDWIDE
box / sat box
Figures and illustrations in this User Manual are provided for reference
Be sure to check before
HDMI / DVI IN
port with HDMI to DVI cable, you should set the
HDMI
You can only choose external devices that are connected
only and may differ from actual product appearance. Product design and
If you have any questions or comments relating to Samsung
plug-in.
TV to DVI mode under Edit Name.
to the TV. In the Source List, connected inputs will be
specifications may be changed without notice.
HDMI OUT
products, please contact the SAMSUNG customer care center.
Selecting a Home Use mode
highlighted.
USB
or
Information
ANT OUT
Still image warning
Country
Customer Care Center 
Web Site
• Select the Home Use mode. Store
Plug & Play
You can see detailed information about the connected external
Avoid displaying still images (such as jpeg picture files) or still image elements
TV Controller (Panel Key)
Demo mode is for retail environments.
DVI OUT
MEXICO
01-800-SAMSUNG(726-7864)
www.samsung.com
Select 'Home Use' when installing this TV in your home.
device.
(such as TV channel logos, panorama or 4:3 image format, stock or news bars
• When pressing TV controller, the
Cable
at screen bottom etc.) on the screen. Constant displaying of still pictures can
ARGENTINA
0800-333-3733
www.samsung.com
function menu screen appears. Select
Function menu
cause ghosting of LED screen, which will affect image quality. To reduce risk of
the MENU(m) and press it more than 5
Store Demo
Home Use
0800-124-421
PC
Remote Control
this effect, please follow below recommendations:
BRAZIL
www.samsung.com
seconds using the controller. The Store
MEDIA.P
L Move
E Enter
4004-0000
Demo mode is set. Cancel the Store
• Avoid displaying the same TV channel for long periods.
m
R
s
UN22ES4003
UN32EH4003 / UN39EH5003
Demo by selecting Source List(s)
CHILE
800-SAMSUNG(726-7864)
www.samsung.com
• Always try to display any image on full screen, use TV set picture format
P
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
and pressing it more than 5 seconds.
menu for best possible match.
Return
COLOMBIA
01-8000112112
www.samsung.com
• Reduce brightness and contrast values to minimum required to achieve
Media Play
PC
COSTA RICA
0-800-507-7267
www.samsung.com
desired picture quality, exceeded values may speed up the burnout process.
Selecting an antenna
Using a USB Drive
Turns the TV on and off.
Displays and selects the available video sources.
Using an HDMI Cable or
• Frequently use all TV features designed to reduce image retention and screen
DOMINICA
1-800-751-2676
www.samsung.com
In Cable mode, you can select the correct
an HDMI to DVI Cable.
burnout, refer to proper user manual section for details.
Plug & Play
ECUADOR
1-800-10-7267
www.samsung.com
signal source among STD, HRC, and IRC
R G
B
R
W
R
R Y
W
R
Select the Antenna source to memorize.
Use the PC speakers for
by pressing the ▲, ▼, ◄ or ► button.
Securing the Installation Space
EL SALVADOR
800-6225
www.samsung.com
TV Rear Panel
audio.
Air
Start
Press to directly access to channels.
Remote control sensor
GUATEMALA
1-800-299-0013
www.samsung.com
Cable
Start
Keep the required distances between the product and other objects (e.g. walls)
TV Controller
TV Controller
to ensure proper ventilation.
HONDURAS
800-7919267
www.samsung.com
Auto
Start
Failing to do so may result in fire or a problem with the product due to an
Press to select additional channels (digital) being
JAMAICA
1-800-234-7267
www.samsung.com
R
G
B
R
W
R
Y
W
R
Returns to the previous channel.
Turns the TV on by pressing the controller in standby
broadcasted by the same station. For example, to
increase in the internal temperature of the product.
Power on
mode.
select channel '54-3', press '54', then press '-' and '3'.
NICARAGUA
00-1800-5077267
www.samsung.com
U Move
E Enter
m Skip
Cuts off the sound temporarily.
COMPONENT OUT
AUDIO OUT
VIDEO OUT
AUDIO OUT
When using a stand or wall-mount, use parts provided by Samsung
Adjusts the volume by moving the controller from side
PANAMA
800-7267
www.samsung.com
Electronics only.
Adjusting the volume
to side when the power is on.
x
If you use parts provided by another manufacturer, it may result in a
PERU
0-800-777-08
www.samsung.com
Y
P
B
P
R
R-AUDIO-L
R-AUDIO-L
Setting the Clock Mode
Adjusts the volume.
Changes channels.
problem with the product or an injury due to the product falling.
Selects a channel by moving the controller up and
AV Device (2)
AV Device (3)
PUERTO RICO
1-800-682-3180
www.samsung.com
Selecting a channel
down when the power is on.
The appearance may differ depending on the product.
Set the Clock Mode automatically or
Plug & Play
Using a Component Cable
Using an Audio/Video
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
www.samsung.com
Displays the channel list on the screen.
manually.
Displays the main on-screen menu.
Be careful when you contact the TV because some parts can be
(up to 1080p)
Cables
Press the controller when the power is on, then the
Set the Clock Mode.
Using the function
somewhat hot.
VENEZUELA
0-800-100-5303
www.samsung.com
• If you select the Auto, set the
function menu screen appears. If you press it again,
Power Input
MEDIA.P
SLEEP
Views the Media Play.
menu
DST(Daylight Saving Time).
Automatically shuts off the TV at a preset time.
the function menu screen disappears.
Clock Mode
: Auto
Installation with a stand.
Installation with a wall-mount.
• On the DST screen, press ENTERE,
then select whether to turn DST
Quickly select frequently used functions.
(MEXICO Only)
Selects the MEDIA.P by moving the controller in
Blu-ray player
VCR
Displays information on the TV screen.
Selecting the Media
the function menu screen. The Media Play main
(Daylight Savings Time) on or off. Select
UN22ES4003
4inches
4inches
Play
E Enter
m Skip
IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO S.A. de C.V.
the time zone where you live.
screen appears.
Selects the on-screen menu items and changes the
Note
4inches
4inches
4inches
4inches
AV. PRESIDENTE MASARIK #111 INT701
values seen on the menu.
Selects the MENU(m) by moving the controller in the
COL. CHAPULTEPEC MORALES C.P.11570
y For better picture and audio quality, connect to a digital device using an HDMI
Selecting the MENU
function menu screen. The OSD(On Screen Display)
Viewing the HD Connection Guide
DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL
(m)
cable.
Returns to the previous menu.
Exit the menu.
of your TV's feature appears.
Tel: 01-55-5747-5100 / 01-800-726-7864
4inches
y The picture may not display normally (if at all) or the audio may not work if an
The connection method for the best HD screen quality is displayed.
Use these buttons according to the direction on screen.
Selects the Source List(s) by moving the
external device that uses an older version of HDMI mode is connected to the TV. If
Selecting the Source
controller in the function menu screen. The Source
such a problem occurs, ask the manufacturer of the external device about the HDMI
P.SIZE: Lets you choose the picture size.
List (s)
List screen appears.
version and, if out of date, request an upgrade.
MTS: Press to choose stereo, mono or Separate Audio
Use these buttons in a specific feature.
Enjoy your TV.
y Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display
Program (SAP broadcast).
Selects the Power Off (P) to turn the TV off by
Power Off (P)
or a connection error may occur.
CC: Controls the caption decoder.
moving the controller in the function menu screen.
Press the
ENTERE
button.
y PC/DVI AUDIO IN input are not supported.
Exits the menu when pressing the controller more than 1 second.
y DIGITAL AUDIO OUT(OPTICAL) is not supported.
Installing batteries (Battery size: AAA)
NOTE
y For HDMI/DVI cable connection, you must use the
HDMI IN 1(DVI)
or
HDMI / DVI
x
Use the remote control within 23 feet from TV.
When selecting the function by moving the controller to the up/down/left/
IN
jack.
x
right directions, be sure not to press the controller. If you press it first, you
Bright light may affect the performance of the remote control.
y Connecting through the HDMI cable may not be supported depending on the PC.
Avoid use when nearby fluorescent lights or neon signs.
cannot operate it to move the up/down/left/right directions.
x
y If an HDMI to DVI cable is connected to the
HDMI IN 1(DVI)
or
HDMI / DVI IN
port,
The Color and shape may vary depending on the model.
the audio does not work.
For UN22ES4003 connection, you can refer
y SERVICE: Connector for service only.
to UN32EH4003 / UN39EH5003 according to
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04466C-00
connection numbers.
BN68-04466C
- 1 -
- 2 -
- 3 -
- 4 -
How to Stop Auto Programming
Channel Mode
Picture Options
■ Program Rating Lock: You can block rated TV Programs.
■ Digital Caption Options: (digital channels only)
Channel Menu
Sound Menu
Setup Menu
■ TV Parental Guidelines: You can block TV programs depending
Size: Options include Default, Small, Standard and Large. The
1. Press the ENTERE button.
Change the channel mode directly between Added Channels and
When connecting a PC, you can only make changes to the
on their rating. This function allows you to control what your
default is Standard.
Favorite Channels.
Color Tone, Size and HDMI Black Level.
❑ Seeing Channels
2. A message will ask Stop Auto Program? Select Yes by pressing
Mode t
children are watching.
Font Style: Options include Default and Styles 0 to 7. The
the ◄ or ► button.
The Favorite Channels is enabled only when you set Add to
■ Color Tone (Cool / Standard / Warm1 / Warm2)
❑ Setting the Time
■ MPAA Rating: You can block movies depending on their MPAA
default is Style 0.
Favorite.
■ Standard: Selects the normal sound mode.
Warm1 or Warm2 will be deactivated when the picture
rating. The Motion Picture Association of America(MPAA) has
Foreground Color: Options include Default, White, Black, Red,
Channel List
3. Press the ENTERE button.
mode is Dynamic.
■ Music: Emphasizes music over voices.
Time
implemented a rating system that provides parents or guardians
Green, Blue, Yellow, Magenta and Cyan. You can change the
Fine Tune
with advanced information on which films are appropriate for
Add, delete or set Favorite channels and use the program guide for
■ Size: Your cable box/satellite receiver may have its own set of
■ Movie: Provides the best sound for movies.
color of the letter. The default is White.
❑ Other Features
The current time will appear every time you press the
INFO
digital broadcasts. Select a channel in the All Channels, Added
children.
screen sizes as well. However, we highly recommend you use
■ Clear Voice: Emphasizes voices over other sounds.
Background Color: Options include Default, White, Black, Red,
(analog channels only)
button.
Channels, Favorite or Programmed screen by pressing the ▲ / ▼
16:9 mode most of the time.
■ Canadian English: You can block TV programs depending on
■ Amplify: Increase the intensity of high-frequency sounds to allow a
Green, Blue, Yellow, Magenta and Cyan. You can change the
If the reception is clear, you do not have to fine tune the channel, as
buttons, and pressing the ENTERE button. Then you can watch
Clear Scrambled Channel
■ Clock: Setting the clock is for using various timer features of the
their Anglophone Canadian.
16:9: Sets the picture to 16:9 wide mode.
better listening experience for the hearing impaired.
background color of the caption. The default is Black.
this is done automatically during the search and store operation. If
the selected channel.
TV.
■ Canadian French: You can block TV programs depending on
Zoom1: Use for moderate magnification.
Foreground Opacity: This adjusts the opacity of text. Options
This function filters out scrambled channels after Auto Program is
the signal is weak or distorted, fine tune the channel manually.
Equalizer
If you disconnect the power cord, you have to set the clock
their French Canadian rating.
include Default, Transparent, Translucent, Solid and Flashing.
completed. This process may take up to 20~30 minutes.
Zoom2: Use for a stronger magnification.
6
Air
Fine tuned channels that have been saved are marked with an
again.
■ Downloadable U.S. Rating: Parental restriction information can
Background Opacity: This adjusts the opacity of the caption
6-1
♥ TV #6
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire
(standard sound mode only)
Press the ENTERE button to stop the Clear Scrambled
asterisk "*" on the right-hand side of the channel number in the
be used while watching DTV channels.
Clock Mode: Set the current time manually or automatically.
background. Options include Default, Transparent, Translucent,
screen.
Channel.
channel banner.
7-1
♥ TV #7
■ Balance L/R: Adjusts the balance between the right and left
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
■ Change PIN: The Change PIN screen will appear. Choose any
Solid and Flashing.
4:3: Sets the picture to basic (4:3) mode.
speaker.
8
Air
This function is only available in Cable mode.
To reset the fine-tuning, select Reset.
4 digits for your PIN and enter it in Enter New PIN. Re-enter
Return to Default: This option sets each Size, Font Style,
Do not watch in 4:3 format for a long time. Traces of borders
Available only when Clock Mode is set to Manual.
9
Air
■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):
the same 4 digits in Confirm New PIN. When the Change PIN
Foreground Color, Background Color, Foreground Opacity and
9-1
♥ TV #9
displayed on the left, right and center of the screen may
Channel List
Adjusts the level of specific bandwidth frequencies.
Time Zone: Select your time zone.
Picture Menu
screen disappears, press the
OK
button. The TV has memorized
10
Air
Background Opacity to its default.
cause image retention (screen burn) which are not covered
■ Reset: Resets the equalizer to its default settings.
DST (Daylight Saving Time): Switches the DST (Daylight Saving
your new PIN.
10-1
♥ TV #10
Digital Caption Options are available only when Default
by the warranty.
Channel List Option Menu t
Time) function on or off.
11-1
♥ TV #11
If you forget the PIN, press the remote-control buttons in
and Service1 ~ Service6 can be selected in Caption
SRS TruSurround HD
Air
'
Zoom
'
Select T Tools ► Next Program
Mode t
Screen Fit (DTV): Displays the full image without any cut-off when
DST and Time Zone function is only available when the
Set each channel using the Channel List menu options. Option
the following sequence, which resets the pin to "0-0-0-0" :
Mode.
HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)
menu items may differ depending on the channel status.
Clock Mode is set to Auto.
POWER
(off) →
MUTE
→ 8 → 2 → 4 →
POWER
(on)
All Channels: Shows all currently available channels.
(standard sound mode only)
The Foreground and Background cannot be set to have the
Select your preferred picture type.
signals are inputted.
■ Sleep Timer t
■ Add / Delete: Delete or add a channel to display the channels
Added Channels: Shows all added channels.
Language
same color.
SRS TruSurround HD is a patented SRS technology that solves the
When connecting a PC, you can only select Entertain and
HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p
you want.
Automatically shuts off the TV after a preset period of time. (30,
■ * Favorite: Shows all favorite channels.
problem of playing 5.1 multichannel content over two speakers.
Standard.
(1280x720)
Set the menu language.
Melody
All deleted channels will be shown on the All Channels
TruSurround delivers a compelling, virtual surround sound experience
60, 90, 120, 150 and 180 minutes).
Programmed: Shows all currently reserved programs.
■ Dynamic: Suitable for a bright room.
Settings can be adjusted and stored for each external device
menu.
through any two-speaker playback system, including internal
Choose between English, Español and Français.
To cancel the Sleep Timer, select Off.
you have connected to an input on the TV.
Set so that a melody plays when the TV is turned on or off.
■ Standard: Suitable for a normal environment.
television speakers. It is fully compatible with all multichannel formats.
Using the remote control buttons with the Channel List
A gray-colored channel indicates the channel has been
Game Mode
Picture Sizes available by Input Source:
The Melody does not play.
■ Movie: Suitable for watching movies in a dark room.
x
Green (Zoom): Enlarges or shrinks a channel number.
deleted.
Timer 1 / Timer 2 / Timer 3
Preferred Language
x
■ Entertain: Suitable for watching movies and games.
When no sound is output from the TV because the
MUTE
x
When connecting to a game console such as PlayStation™ or
Yellow (Select): Selects multiple channel lists. Select desired
The Add menu only appears for deleted channels.
Input Source
Picture Size
Three different on / off timer settings can be made. You must set the
button has been pressed.
channels and press the Yellow button to set all the selected
Only available when connecting a PC.
Xbox™, you can enjoy a more realistic gaming experience by
(digital channels only)
Delete a channel from the Added Channels or Favorite
clock first.
x
channels at the same time. The c mark appears to the left of
ATV, AV, Component (480i,
When no sound is output from the TV because the volume has
selecting the game menu.
16:9, Zoom1, Zoom2, 4:3
menu in the same manner.
the selected channels.
480p)
Digital-TV broadcasts are capable of simultaneous transmission of
been reduced to minimum with the
VOL –
button.
Backlight / Contrast / Brightness / Sharpness /
■ On Time / Off Time: Set the hour, minute, am/pm and Activate /
Precautions and limitations for game mode
many audio tracks (for example, simultaneous translations of the
x
■ Add to Favorite / Delete from Favorite t : Set channels
Inactivate. (To activate the timer with the setting you have chosen,
x
When the TV is turned off by Sleep Timer function.
T (Tools): Displays the Channel List option menu. (The Options
Color / Tint (G/R)
DTV(1080i, 1080p),
x
program into foreign languages).
To disconnect the game console and connect another external
menus may differ depending on the situation.)
you watch frequently as Favorites.
16:9, Wide Fit, 4:3, Screen
set to Activate.)
Component (1080i, 1080p),
device, set Game Mode to Off in the setup menu.
■ Timer Viewing: You can set a desired channel to be displayed
Fit
You can only select a language from among the ones being
Auto Protection Time
Your television has several setting options for picture quality control.
■ Volume: Set the desired volume level.
Channel Status Display icons
HDMI (720p, 1080i, 1080p)
x
If you display the TV menu in Game Mode, the screen shakes
automatically at the set time; even when you are watching another
broadcasted.
■ Contents: When the On Time is activated, you can turn on a
When connecting a PC, you can only make changes to
slightly.
■ Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
channel. Set the current time first to use this function.
Icons
Operations
Backlight, Contrast, Brightness and Sharpness
■ Digital Noise Filter (Off / Low / Medium / High / Auto): If the
specific channel or play back contents such as photo or audio files.
hours): If the screen remains idle with a still image for a certain
Multi-Track Sound (MTS)
Game Mode is not available when the input source is set to
Only memorized channels can be reserved.
broadcast signal received by your TV is weak, you can activate
- TV/USB: Select TV or USB. (Make sure that an USB device is
period of time defined by the user, the screen saver is activated
c
A channel selected.
TV.
Reserved programs will be displayed in the Programmed
Advanced Settings
the Digital Noise Filter feature to reduce any static and ghosting
connected to your TV.)
to prevent the formation of ghost images on the screen.
(analog channels only)
*
A channel set as a favorite.
After connecting the game console, set Game Mode to On.
that may appear on the screen.
menu.
- Antenna: Displays the current antenna source.
■ Mono: Choose for channels that are broadcasting in mono or if
(available in Standard / Movie mode)
Unfortunately, you may notice reduced picture quality.
Eco Solution
A reserved program.
When the signal is weak, try other options until the best
- Channel: Select the desired channel.
When a digital channel is selected, press the ► (Next
you are having difficulty receiving a stereo signal.
Compared to previous models, new Samsung TVs have a more
Program) button to view the digital program. If you select
picture is displayed.
A program currently being broadcast.
- Music/Photo: Select the folder containing MP3/JPEG files on
Caption
■ Energy Saving (Off / Low / Medium / High / Picture Off) :
(
■ Stereo: Choose for channels that are broadcasting in stereo.
precise picture.
the ENTERE(Schedule) button on the next program, you
the USB device.
■ HDMI Black Level (Normal / Low): Selects the black level on the
This adjust the brightness of the TV in order to reduce power
■ SAP: Choose to listen to the Separate Audio Program, which is
can set Timer Viewing directly.
When connecting a PC, you can only make changes to
screen to adjust the screen depth.
The maximum displayed number of files, including sub
(On-Screen Text Messages)
consumption. If you select Picture Off, the screen is turned
usually a foreign-language translation.
❑ Memorizing channels
Gamma and White Balance.
off, but the sound remains on. Press any button except volume
■ Channel Name Edit (analog channels only): Assign your own
Available only in HDMI mode (RGB signals).
folders, in one folder of USB storage device is 2000.
■ Caption: You can switch the caption function on or off. If
Depending on the program being broadcast, you can listen to
channel name.
■ Color Space (Auto / Native): Adjusts the range of colors
captions are not available, they will not be displayed on the
button to turn on the screen.
■ Film Mode (Off / Auto): Sets the TV to automatically sense and
Mono, Stereo or SAP.
The media may not be playing smoothly when using the
Antenna (Air / Cable) t
■ Select All: Select all the channels in the channel list.
available to create the image.
screen.
■ No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets
process film signals from all sources and adjusts the picture for
device lower than USB 2.0.
how quickly the TV switches to standby mode, if no picture is
■ White Balance: Adjusts the color temperature for a more natural
Auto Volume
The Caption feature does not work in Component or
■ Deselect All: Deselect all the selected channels.
optimum quality.
Before your television can begin memorizing the available channels,
■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
picture.
HDMI mode.
being received.
You can only select Deselect All when one or more
Available in ATV, DTV(interlace), AV, COMPONENT (480i /
Manual to set at you convenience. If you select Manual, you can
you must specify the type of signal source that is connected to the
Because each broadcasting station has its own signal conditions,
R-Offset / G-Offset / B-Offset: Adjusts each color's (red, green,
Disabled when the PC is in power saving mode.
channels are selected.
1080i) and HDMI (480i / 1080i).
■ Caption Mode: You can select the desired caption mode.
TV (i.e. an Air or a Cable system).
set up the day you want to activate the timer.
the volume may fluctuate each time channel is changed. This feature
blue) darkness.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The
■ Auto Power Off (Off / On): The TV will be automatically turned
■ Auto Program: Scans for a channel automatically and stores in
■ LED Motion Plus (Off / On): Removes drag from fast scenes with
lets you automatically adjust the volume of the desired channel by
R-Gain / G-Gain / B-Gain: Adjusts each color's (red, green, blue)
off when no user operation is received for 4 hours.
Auto Program
the TV.
Analog Caption function operates in either analog TV channel
a lot of movement to provide a clear picture.
lowering the sound output when the modulation signal is high or by
❑ Other Features
brightness.
mode or when a signal is supplied from an external device to the
raising the sound output when the modulation signal is low.
Programmed
When selecting the Cable TV system: Selects the cable
Program Rating Lock
Reset: Resets the White Balance to it's default settings.
Picture Reset
TV. (Depending on the broadcasting signal, the Analog Caption
system. STD, HRC and IRC identify various types of cable TV
(in Channel List)
function may or may not work with digital channels.)
■ Gamma: Adjusts the primary color intensity.
Sound Reset
systems. Contact your local cable company to identify the type
Resets your current picture mode to its default settings.
The Program Rating Lock feature automatically locks out programs
Default / Service1~Service6 / CC1~CC4 / Text1~Text4:
You can view, modify or delete a show you have reserved to watch.
■ Dynamic Contrast (Off / Low / Medium / High): Adjusts the
of cable system that exists in your particular area. At this point,
that are deemed inappropriate for children. The user must enter a
■ Reset Picture Mode: Returns all picture values in the currently
■ Reset All: Resets all sound settings to the factory defaults.
screen contrast.
(digital channels only) The Digital Captions function works with
the signal source has been selected.
■ Change Info: Change a show you have reserved to watch.
PIN (personal identification number) before any of the Program Rating
selected mode to the default settings.
digital channels.
■ Black Tone (Off / Dark / Darker / Darkest): Select the black level
Lock restrictions are set up or changed.
■ Cancel Schedules: Cancel a show you have reserved to watch.
After all the available channels are stored, it starts to
Service1~6 may not be available in digital caption mode
to adjust the screen depth.
remove scrambled channels. The Auto program menu then
■ Information: Display a show you have reserved to watch. (You
Program Rating Lock is not available in HDMI or Component
depending on the broadcast.
■ Flesh Tone: Emphasize pink "flesh tone".
reappears.
can also change the reservation Information.)
mode.
■ Motion Lighting (Off / On): Reduce power consumption by
■ Select All / Deselect All: You can select or deselect all channels
Press the ENTERE button to stop the channel store during
The default PIN number of a new TV set is "0-0-0-0".
brightness control adapted motion.
in the channel list.
Auto Program.
Available in Standard mode only.
- 5 -
- 6 -
- 7 -
- 8 -
[UE4003-ZX]BN68-04466C-ENG.indd 1
2012-05-21
9:15:50

   Related Manuals for Samsung UN32EH4003F

   Summary of Contents for Samsung UN32EH4003F

  • Page 1

    Cuts off the sound temporarily. ✎ COMPONENT OUT AUDIO OUT VIDEO OUT AUDIO OUT When using a stand or wall-mount, use parts provided by Samsung Adjusts the volume by moving the controller from side PANAMA 800-7267 www.samsung.com  Electronics only.

  • Page 2

    35.2 X 23.2 X 8.9 inches Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings inappropriate noise. • For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

This manual also for:

Un39eh5003f, Un32eh4003v, Un22es4003, Un32eh4003, Un39eh5003

Comments to this Manuals

Symbols: 0
Latest comments:
  • DIANA MENESES Dec 26, 2014 06:23:
    NO COMMENT NO COMMENT NO COMMENT COMMENT