Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Compaq Pavilion g6-2000
Summary of Contents for Compaq Pavilion g6-2000
-
Page 1: Getting Started
Getting Started Compaq Notebook... - Page 2 Bluetooth is a trademark owned by its common to most models. Some features otherwise using any software product proprietor and used by Hewlett-Packard may not be available on your computer. preinstalled on this computer, you agree to Company under license. Microsoft and be bound by the terms of the HP End User Windows are U.S.
- Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
- Page 4 Safety warning notice...
-
Page 5: Table Of Contents
Table of contents 1 Welcome ................................1 Finding information ..........................2 2 Getting to know your computer ........................4 Top ............................... 4 TouchPad ..........................4 Lights ........................... 5 Buttons ..........................6 Keys ............................. 7 Right side ............................. 8 Left side ..............................9 Display .............................. - Page 6 Turning the TouchPad off and on ..............21 Navigating ......................21 Selecting ......................22 Using TouchPad gestures ................. 22 Scrolling .................... 23 Pinching/Zooming ................23 Rotating (select models only) ............24 Flicking (select models only) ............24 6 Maintenance ..............................25 Inserting or removing the battery ......................
-
Page 7: Welcome
Welcome ● Finding information After you set up and register the computer, it is important to take the following steps: ● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet. For more information, refer to Networking on page ●... -
Page 8: Finding Information
Finding information The computer comes with several resources to help you perform various tasks. Resource Contents ● Instructions for setting up the computer How to set up the computer ● Identification of computer components ● Getting Started Computer features ● To access this guide: Instructions for the following: ◦... - Page 9 North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd, Boise, ID 83714, USA ● Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy ● Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, warranty period (found on your serial number label), name, and postal address.
-
Page 10: Getting To Know Your Computer
Getting to know your computer ● ● Right side ● Left side ● Display ● Bottom TouchPad Component Description ● TouchPad light Amber: The TouchPad is off. ● Off: The TouchPad is on. TouchPad on/off button Turns the TouchPad on and off. Quickly double-tap the TouchPad on/off button to turn the TouchPad on and off. -
Page 11: Lights
Component Description Left TouchPad button Functions like the left button on an external mouse. Right TouchPad button Functions like the right button on an external mouse. Lights Component Description ● TouchPad light Amber: The TouchPad is off. ● Off: The TouchPad is on. ●... -
Page 12: Buttons
Buttons Description ● Power button When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep. -
Page 13: Keys
Keys Component Description Displays system information when pressed in combination with the key. Action keys Execute frequently used system functions. Displays system information when pressed in combination with the key. Windows logo key Displays the Windows Start menu. ● QuickWeb key When the computer is off or in Hibernation, press the button to open HP QuickWeb. -
Page 14: Right Side
Right side Component Description Optical drive (select models only) Reads and writes to an optical disc. ● Optical drive light On: The optical drive is in use. ● Off: The optical drive is idle. USB ports (2) Connect optional USB devices. Power connector Connects an AC adapter. -
Page 15: Left Side
Left side Component Description External monitor port Connects an external VGA monitor or projector. Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. -
Page 16: Display
Display Component Description WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLAN). NOTE: Select computer models only have one WLAN antenna. Webcam light On: The webcam is in use. Webcam Records video and captures still photographs. To use the webcam, select Start >... -
Page 17: Bottom
Bottom Component Description Battery bay Holds the battery. Battery release latch Releases the battery from the battery bay. Vents (5) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. -
Page 18: Hp Quickweb (Select Models Only)
HP QuickWeb (select models only) ● Starting HP QuickWeb The HP QuickWeb environment provides a fun and engaging way to perform many of your favorite activities. Your computer is ready to go within seconds of starting QuickWeb, allowing you to rapidly access the Internet, widgets, and communication programs. -
Page 19: Starting Hp Quickweb
Starting HP QuickWeb ▲ To start HP QuickWeb, press the QuickWeb key (or QuickWeb button on select models) when the computer is off or in Hibernation. The following table explains the different behaviors of the QuickWeb key (or QuickWeb button on select models). -
Page 20: Networking
Networking ● Using an Internet service provider (ISP) ● Connecting to a wireless network NOTE: Internet hardware and software features vary depending on computer model and your location. Your computer may support one or both of the following types of Internet access: ●... -
Page 21: Using An Internet Service Provider (Isp)
Using an Internet service provider (ISP) Before you can connect to the Internet, you must establish an ISP account. Contact a local ISP to purchase Internet service and a modem. The ISP will help set up the modem, install a network cable to connect your wireless computer to the modem, and test the Internet service. -
Page 22: Connecting To An Existing Wlan
Connecting to an existing WLAN Turn on the computer. Be sure that the WLAN device is on. Click the network icon in the notification area, at the far right of the taskbar. Select a network to connect to. Click Connect. If required, enter the security key. -
Page 23: Configuring A Wireless Router
Configuring a wireless router For help in setting up a WLAN, refer to the information provided by your router manufacturer or your ISP. The Windows 7 operating system also provides tools to help you set up a new wireless network. To use the Windows tools to set up your network: ●... -
Page 24: Keyboard And Pointing Devices
Keyboard and pointing devices ● Using the keyboard ● Using pointing devices Using the keyboard Using the action keys Action keys are used for performing customized actions that are assigned to specific keys at the top of the keyboard. The icons on the through keys represent the action key functions. - Page 25 Icon Action Description Switch screen Switches the screen image among display devices connected to the system. image For example, if a monitor is connected to the computer, this key alternates the screen image from computer display to monitor display to simultaneous display on both the computer and the monitor.
-
Page 26: Using Pointing Devices
Using pointing devices NOTE: In addition to the pointing devices included with your computer, you can use an external USB mouse (purchased separately) by connecting it to one of the USB ports on the computer. Setting pointing device preferences Use Mouse Properties in Windows® to customize settings for pointing devices, such as button configuration, click speed, and pointer options. -
Page 27: Turning The Touchpad Off And On
Turning the TouchPad off and on To turn the TouchPad off and on, quickly double-tap the TouchPad on/off button. NOTE: The TouchPad light is off when the TouchPad is on. Navigating To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go. Using pointing devices... -
Page 28: Selecting
Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse. Using TouchPad gestures The TouchPad supports a variety of gestures. To use TouchPad gestures, place two fingers on the TouchPad at the same time. NOTE: TouchPad gestures are not supported in all programs. -
Page 29: Scrolling
Scrolling Scrolling is useful for moving up, down, or sideways on a page or image. To scroll, place two fingers slightly apart on the TouchPad, and then drag them across the TouchPad in an up, down, left, or right motion. NOTE: Scrolling speed is controlled by finger speed. -
Page 30: Rotating (Select Models Only)
Rotating (select models only) Rotating allows you to rotate items such as photos. To rotate, anchor your left forefinger in the TouchPad zone. Move the right forefinger around the anchored finger in a sweeping motion, moving from 12 o’clock to 3 o’clock. To reverse the rotation, move your right forefinger from 3 o’clock to 12 o’clock. -
Page 31: Maintenance
Maintenance ● Inserting or removing the battery ● Replacing or upgrading the hard drive ● Adding or replacing memory modules Inserting or removing the battery NOTE: For additional information on using the battery, refer to the HP Notebook Reference Guide. To insert the battery: ▲... - Page 32 CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer through Windows before removing the battery. Slide the battery release latch (1) to release the battery.
-
Page 33: Replacing Or Upgrading The Hard Drive
Replacing or upgrading the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. -
Page 34: Installing A Hard Drive
Remove the hard drive cover (2). Disconnect the hard drive cable (1) from the computer. Remove the 4 hard drive screws (2). Lift the hard drive (3) out of the hard drive bay. Installing a hard drive Insert the hard drive (1) into the hard drive bay. Replace the 4 hard drive screws (2). - Page 35 Connect the hard drive cable (3) to the computer. Slide the cable under the plastic notches. Align the tabs on the hard drive cover (1) with the notches on the computer. Close the cover (2). Tighten the hard drive cover screw (3). Align the tabs on the memory module compartment cover (1) with the notches on the computer.
-
Page 36: Adding Or Replacing Memory Modules
Tighten the memory module compartment cover screw (3). Replace the battery. Reconnect external power and external devices. Turn on the computer. Adding or replacing memory modules The computer has two memory module slots. The capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. - Page 37 CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before adding or replacing memory modules. Do not remove a memory module while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button.
- Page 38 Grasp the edge of the memory module (2), and then gently pull the memory module out of the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protect a memory module after removal, place it in an electrostatic-safe container.
- Page 39 Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module.
- Page 40 Reconnect external power and external devices. Turn on the computer. Chapter 6 Maintenance...
-
Page 41: Backup And Recovery
Backup and recovery Your computer includes tools provided by the operating system and HP to help you safeguard your information and restore it if ever needed. This chapter provides information on the following topics: ● Creating a set of recovery discs or a recovery flash drive (HP Recovery Manager software feature) ●... -
Page 42: Restore
Restore In the event of hard drive failure, to restore your system to its factory image you will need a set of recovery discs or a recovery flash drive that you can create using HP Recovery Manager. HP recommends that you use this software to create either a set of recovery discs or a recovery flash drive immediately after software setup. -
Page 43: Performing A System Restore
To create a set of recovery discs or a recovery flash drive: Select Start > All Programs > Security and Protection > HP Recovery Manager > HP Recovery Media Creation. Follow the on-screen instructions. Performing a system restore HP Recovery Manager software allows you to repair or restore the computer to its original factory state. -
Page 44: Restoring Using The Restore Media
Restoring using the restore media If possible, back up all personal files. Insert the first recovery disc into the optical drive on your computer or an optional external optical drive, and then restart the computer. – or – Insert the recovery flash drive into a USB port on your computer, and then restart the computer. NOTE: If the computer does not automatically restart in the HP Recovery Manager, the computer boot order needs to be changed. -
Page 45: Changing The Computer Boot Order
Changing the computer boot order To change the boot order for recovery discs: Restart the computer. Press while the computer is restarting, and then press for boot options. Select Internal CD/DVD ROM Drive from the boot options window. To change the boot order for recovery flash drive: Insert the flash drive into a USB port. -
Page 46: Using Windows Backup And Restore
To create a screen shot: Display the screen you want to save. Copy the screen image: To copy only the active window, press alt+prt To copy the entire screen, press Open a word-processing document, and then select Edit > Paste. The screen image is added to the document. -
Page 47: Using Windows System Restore Points
Using Windows system restore points A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes. NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point. -
Page 48: Customer Support
Customer support ● Contacting customer support ● Labels Contacting customer support If the information provided in this user guide, in the HP Notebook Reference Guide, or in Help and Support does not address your questions, you can contact HP Customer Support at: http://www.hp.com/go/contactHP NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go to... -
Page 49: Labels
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Serial number label—Provides important information, including the following: Component Product name Serial number (s/n) Part number/Product number (p/n) Warranty period Model description Have this information available when you contact technical support. -
Page 50: Specifications
Specifications ● Input power ● Operating environment Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. -
Page 51: Operating Environment
Operating environment Factor Metric U.S. Temperature Operating 5°C to 35°C 41°F to 95°F Nonoperating -20°C to 60°C -4°F to 140°F Relative humidity (noncondensing) Operating 10% to 90% 10% to 90% Nonoperating 5% to 95% 5% to 95% Maximum altitude (unpressurized) Operating -15 m to 3,048 m -50 ft to 10,000 ft... -
Page 52: Index
Index display 10 Internet connection setup 16 AC adapter light, identifying 8 left side 9 ISP, using 15 action keys right side 8 adjusting volume 19 top 4 jacks 9 audio CD, DVD, or BD connector, power 8 audio-in (microphone) 9 controls 19 audio-out (headphone) 9 decrease screen brightness... - Page 53 removing 31 recovering from the recovery webcam, identifying 10 replacing 30 discs 38 Windows applications key, memory module compartment recovery discs 36 identifying 7 cover recovery, system 37 Windows logo key, identifying 7 removing 27, 31 regulatory information wireless certification label 43 replacing 29, 33 regulatory label 43 wireless key, identifying 19...