No Signal Power Down; Using Hdmi Tm Cec - Toshiba 39L2300U User Manual

Integrated high definition led television
Hide thumbs Also See for 39L2300U:
Table of Contents

Advertisement

98
Setting up your TV
Using HDMITM CEC
Using HDMI
2
Press the Number buttons to enter the length of time
(maximum of 12 hours) and then press the ENTER button. Or
press the /▼(arrow) buttons to increase or decrease in
10-minute increments (maximum of 12 hours).
To display the time remaining until the TV turns off, press the
SLEEP button.
To cancel the sleep timer, repeatedly press SLEEP until it is set to 0
minutes.

No Signal Power Down

The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
Low signal strength of analog channel (no signal detection)
v
Only Audio L/R is connected to external input to listen to music
v
through the TV speakers.
To change the no signal power down setting:
1
From the Options menu, highlight Power Management, and
then press the ENTER button.
2
Highlight No Signal Power Down, and then press the ENTER
button.
3
Press the /▼(arrow) buttons to highlight the item you want to
change, and press the ◄/►(arrow) buttons to select On or Off.
Using HDMI
TM
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI
remote via HDMI
on page
When Enable HDMI CEC Control in the HDMI CEC Control
Setup menu is set to On (see
101), the HDMI
TM
CEC
If a power failure occurs, the sleep timer setting may be cleared.
Default setting for this feature is On.
v
A warning message will appear 1 minute before the TV turns off.
v
CEC
TM
connection (see
TM
33)
CEC functions described below will be enabled.
TM
CEC compatible devices from the TV
"HDMITM CEC connection"
HDMI
"Setting up HDMITM CEC" on page
HDMI
TM
TM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents