Specifications - Yamaha TRB-JP2 Service Manual

SPECIFICATIONS

STANDARD SPECIFICATIONS
Scale Length .............................. 889.0mm
Body-Neck Construction ......... Bolt On
Length ........................................ 1200.0mm
Width ......................................... 353.0mm
Net Weight ................................ 5.2kg
COLOR
Body
TDR ......................................... Translucent Dark Red
AM ........................................... Amber
Neck
TDR ......................................... Translucent Dark Red
AM ........................................... Amber
BODY
Material ...................................... Exotic Maple + Ash + Alder +
Exotic Maple Back
Body Depth ............................... 43mm
FINGERBOARD
Material ...................................... Ebony
Fingerboard Width ................... 0-F 56.0mm, 12-F 81.1mm
No. of Frets ................................ 26
NECK
Material ...................................... Maple
Neck Thickness ........................ 1-F 21.0mm, 12-F 23.5mm
PARTS
Hardware ................................... Gold Plated
Nut .............................................. Bone
Bridge ........................................ BPX-6C (Gold)
Strings ........................................ H6010
CONTROLS
Volume ....................................... A 5K x 1
Balancer ..................................... B 20K x 1
Equalizer .................................... W 50K x 3 (BASS, MID, TREBLE)
PICKUPS
Front/Rear ................................ Humcancel Single Coil
Magnet
Front/Rear ............................. Alnico V
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where
applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly
other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT
SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling
food.
WARNING: CHEMICAL CONTENT NOTICE!
TRB-JP2
9