Advertisement
Quick Links
DEAGAN CHIMES SERIES
DC9190A / DC9160A / DC9150A
DC9190B / DC9160B / DC9150B
/ Owner's Manual
Thank you for selecting the DEAGAN chimes.
Please read this owner's manual carefully, and truly enjoy this instrument for
years to come.
Make sure to read the "PRECAUTIONS" on page 4 and the "Before you use" on page 5.
Advertisement
Related Manuals for Yamaha DC9150A
Summary of Contents for Yamaha DC9150A
- Page 1 DEAGAN CHIMES SERIES DC9190A / DC9160A / DC9150A DC9190B / DC9160B / DC9150B / Owner’s Manual Thank you for selecting the DEAGAN chimes. Please read this owner’s manual carefully, and truly enjoy this instrument for years to come. Make sure to read the “PRECAUTIONS” on page 4 and the “Before you use” on page 5.
-
Page 3: Preventing Injuries
PRECAUTIONS Using the Chimes Safely The chimes are a large and heavy instrument that gets used in various places by persons of all ages, so please obey the following instructions regarding their regular care and placement. Especially in the case of children, a responsible adult should provide proper instruction on how to use and treat the chimes before use. -
Page 4: Before You Use
Before you use 1 Never use a metal type hammer or mallets to strike the sound column with. The sound column will break. 2 Always use the instrument on a flat, level sur- face. The instrument will not function properly on a sloped surface. - Page 5 Make sure the chimes are assembled or disassembled by at least two persons. Connect the pedal assembly to the left and right base sections. Position the pedal assembly and left/right base sections as shown in the illustration below. * The following procedure is carried out to en- sure that the performer faces forward when playing the instrument.
- Page 6 Hanger Longer Side Column Damper Stopper Shorter Damper Rest Damper Hall for Mark Base (Left) Pedal Ass’y Caster Damper Pedal Base (Right) Damper Rod Hook Pull Rod Knob Pipe of Pedal Ass’y Upper Pull Rod...
- Page 7 Hanging the sound columns from the hanger. Make sure that the damper is disengaged (the damper stopper is set). * If the damper is engaged, press down on the damper pedal, then push down on the damper stopper and release the damper pedal to en- gage the damper stopper.