TrekStor i.Beat vision DM 1GB Quick Start Manual page 13

• Manual station search with memory
Briefly press the
the / buttons to change the reception frequency by 0.05 MHz. After pressing the
a sufficient length of time, the device automatically searches for the station with the next best reception.
To save the selected station, press the
and confirm that it should be saved by pressing the
• Change saved stations
Briefly press the /
• Recording FM radio
Press the button longer than one second to start recording FM radio. Briefly press the
button to end recording.
Note: All FM radio recordings are saved under the "RECORD" folder in the "FM" subfolder.
Mode: Record
Switch to "Record" mode.
Use the navigation cross
settings. Press the /
• Line-In recording
You can connect an external device to the Line-In jack (such as a CD player) and directly record from it. Select
"LINE-IN" as the source, and confirm by pressing the
recording. Stop recording by pressing the
Note: All Line-In recordings are saved under the "RECORD" folder in the "LINEIN" subfolder.
• Recording with the microphone
You can record your voice using the integrated microphone. Select "MICRO" as the source, and confirm by
pressing the button. Briefly press the
the button.
Note: All voice recordings are saved under the "RECORD" folder in the "VOICE" subfolder.
button to go from "Station Memory" mode to manual station search. Briefly press
buttons in "Station Memory" mode to switch between the available memories.
to make different recording settings. Press the
buttons to change settings.
button, select a station memory with the
button.
button. Briefly press the
button.
button to start recording. Stop recording by pressing
– 13 – – 13 –
/ buttons for
/ buttons,
/ buttons to switch between
button to start
EN