Raytheon RayChart 620 Operation Manual page 54

Chapter 4: Additional Basic Functions
3. Press the WINDOW SETUP soft key to display the selection keys
4. Use the two left-hand soft keys to select the number and location of
5. Use the SELECT LEFT WINDOW or SELECT RIGHT WINDOW
6. When you are happy with your selections, press ENTER to return to
and current settings, as shown in the following example.
the windows. You can select:
- One window at the bottom left of the chart display
- One window at the bottom right of the chart display
- Two windows, one above the other, in a full-height column at the
right of the chart display
The display changes as you highlight the different settings.
soft key to select the data set for the window.
Each time you press a SELECT WINDOW soft key, the next
available set of data is displayed in the current window. These sets
include the six default windows supplied with your RayChart, plus
the four custom windows you can set up as part of your display
setup procedure (see Chapter 6).
the Display Selection screen. This times out to the chart display with
the new window selection.
Alternatively, press CLEAR to cancel your selections and retain the
previous default configuration.
41
D3833-1