Changing Between Full Screen And Windows; Changing The Window Setup - Raytheon RayChart 620 Operation Manual

Electronic charting system
Table of Contents

Advertisement

40

Changing between Full Screen and Windows

You can change between a full screen display and windowed display
using the soft keys, as follows:
FULL
WINDOW
WINDOW SETUP
The soft key labels disappear after seven seconds if you do not make a
selection.
If you wish to change the display again, press DISPLAY. The soft key
labels are redisplayed.

Changing the Window Setup

The WINDOW SETUP soft key allows you to change the default
windows configuration. You can select:
• The number of windows (1 or 2)
• The position of the windows on the screen
• The contents of the windows, by selecting from the list of predefined
or customized windows available
Note: If the help level is set to Level 1 (the factory setting), the windows
are moved up the screen so that they do not overlap the default soft key
labels. This means that you cannot select two windows in a full-height
column: if you wish to do so, you must change the help setting to
Level 0, as described in Chapter 6.
To change the default window configuration:
1. Press DISPLAY to display the Chart soft keys (see above).
2. If a window is not already displayed, press the WINDOW soft key to
Clears any data windows and soft keys and uses
the full screen for the chart display. The default
soft key labels are displayed, if requested in your
setup selection (see Chapter 6).
Displays the chart together with navigational data,
in the current default windows configuration.
This soft key is shown if a window is already
displayed. It allows you to change the window
configuration, as described below.
display the WINDOW SETUP soft key.
RayChart 620

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents