Raytheon RayChart 620 Operation Manual page 38

Chapter 3: Controlling the Chart and Using the Default Soft Keys
7. Move the cursor to the next waypoint position. A dotted line
8. Press PLACE WPT again. The waypoint is placed and the dotted
9. Repeat steps 7 and 8 until you have placed all your waypoints. You
10. When you have entered all your waypoints, press ENTER or
To add waypoints to a route using an external device such as the
NavPlotter 100, use the MAKE /EDIT option as described above. You
can then add waypoints using either the cursor and the PLACE WPT
key, or using the external device. When an external waypoint is
received, the cursor is positioned on it and the chart is centered.
The first waypoint of a new route has a circle round the waypoint
symbol, indicating that it will be the active waypoint if the route is
made active.
The cursor data box and object data box are updated to show the
waypoint number and position, as shown in the example below.
connects the cursor to the last waypoint.
line changes to a solid line.
Note: If you make a mistake, you can delete a wrongly-placed
waypoint or insert an additional one, as described below.
can have up to 50 waypoints in a route.
CLEAR to clear the Make/Edit soft keys.
Your route is displayed on the screen, but is not active.
25
D3827-1