Soft Key Default Functions - Raytheon RayChart 620 Operation Manual

10

Soft Key Default Functions

In default mode, the soft keys provide a quick method of performing
the tasks you will probably use most often, and which are described in
detail in Chapter 3.
You use the soft keys to access the following functions:
ROUTE Set up or edit an on-screen route of waypoints, and
navigate towards them in turn
GO TO Navigate towards a location you have indicated with the
cursor
RULER Measure distances and bearings on the chart
CENTER Center the chart on the cursor, vessel or a specified
position, or select Home Mode
If different labels are displayed on the screen, press the CLEAR key to
select the default functions.
Note that, when you press a soft key, the action depends on the
function type. It can have the following effects:
• Perform the action immediately; for example, the GO TO soft key
• Display a menu of further options; for example, the ROUTE soft key
• Reassign the soft keys and display new soft key labels; for example,
the CENTER and RULER keys
Try using the CENTER key to center the chart on the cursor position:
1. Move the cursor to one side of the chart.
2. Press the CENTER soft key.
New soft key labels appear above the keys.
3. Press the CENTER CURSOR soft key.
The cursor and its current chart location both move to the center of
the screen.
4. Press CLEAR to leave the option and return to the default screen,
with the new chart position.
RayChart 620
D3352-2
D3351-1