Table of Contents
Advertisement
M
aintenance and care
Cleaning the upper tank
1. Turn off vacuum and unplug it from
electrical outlet.
2. Remove dirt cup by sliding the dirt cup
release lever to the right. Then pull dirt
cup out.
3. Twist the primary separator to unlock it
and pull it down. Brush off any dirt and
rinse off screen with warm water. Air
dry completely before replacing.
4. Check hose inlet for any clogging.
5. Reassemble the primary separator by
centering the front symbol and twisting
toward lock position, as shown.
6. Replace dirt cup and slide lever to
lock position.
Power cord storage
When you have finished using your vacuum,
store the power cord on the cord wrap.
1. Turn off vacuum cleaner and unplug
power cord.
2. Loop power cord around cord wraps
on back of cleaner, making certain
Quick Release cord wrap is pointed
up towards handle.
3. Clip molded plug to power cord
to secure.
10
w w w . b i s s e l l . c o m
2.
6.
5.
Lock Position
WarNINg:
Do not operate cleaner with
damp or wet filters or without
all filters in place.
WarNINg:
To reduce the risk of injury from
moving parts and/or electrical
shock, turn power switch OFF and
disconnect polarized plug from
electrical outlet before performing
troubleshooting checks.
3.
8 0 0 . 2 3 7 . 7 6 9 1
Hide quick links:
Advertisement
Table of Contents
