Epson EMP-7950 User Manual page 88

Using the Configuration Menu Functions Using the Configuration Menu Functions
Sub-menu
Sleep Sets the energy saving operation when no video signal is
Mode being input.
•When set to "ON", projection stops automatically and after
the cool-downg period is finished, the projector changes to
sleep mode (standby mode) if no operations are carried out
for approximately 30 minutes while the "No Signal."
message is being displayed. (The
orange.)
•Projection starts again when the [Power] button on either
the remote control or the projector's control panel is
pressed.
Reset Resets all adjustments values for the "Setting" menu
functions except for the "Computer Input" and "BNC Input"
settings to their default settings.
This cannot be reset to the initial setting if the "User's Logo
Protect" function of Password Protect has been set to "ON"
and "No-Signal Msg." or "A/V Mute" is set to "Logo".
p.61
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel to
reset.
•Select "Reset All" to reset all menu settings – including
settings for the "Video" and "Audio" menus – to their
default settings.
Function
indicator lights
p.95
User's Guide
87
Default
OFF
-