Epson EMP-7950 User Manual page 73

Functions for Enhancing Projection
If the input resolution is lower than the panel resolution (1024 × 768)
Resized display
If the input resolution is higher than the panel resolution (1024 × 768)
Resized display
Real display
The image is projected in the
middle of the screen at the original
input signal resolution.
Real display
The middle section of the image is
projected. You can tilt the [ ]
button on the remote control to
scroll around the image.
TIP
• The display methods for projected images are stored individually for
each video source.
• If the input resolution is the same as the panel resolution
(1024 × × × × 768 dots), the image size will not change.
• In the case of SXGA (5:4) input signals, the image position changes
as shown below each time you press the [Resize] button while
holding down the [Shift] button on the projector's control panel.
Resized display (5:4)
Resized display (4:3)
User's Guide
72
Aligned to left (5:4)
Aligned to right (5:4)